• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Pep Joe

  1. Pep Joe

    Vogele Super 1800-1 augers and conveyors working intermittently

    we were able to resolve this problem. The cause of the problem was the engine charging alternator.
  2. Pep Joe

    My big 14M steering system problem

    Thank you.
  3. Pep Joe

    Vogele Super 1800-1 augers and conveyors working intermittently

    there's no problem on the electrical circuit wiring. All auger and conveyors solenoids resistance are ok. 24.3 to 24.5 Ohms as I measured. wires ok. No short or open circuit. Terminating resistors CAN 1 and 2 ok. 60.1 Ohms measured at B2 module on CAN 1 and 2 respectively. Do they need any...
  4. Pep Joe

    Vogele Super 1800-1 augers and conveyors working intermittently

    Thank you for the reply. Yes there is forward movement of the conveyors but intermittently. Yes the problem is on both sides; the auger left and right forward and backward and the conveyors left and right forward and backward. I think it's electrical problem because the voltage to the...
  5. Pep Joe

    Vogele Super 1800-1 augers and conveyors working intermittently

    When I push the conveyors or the augers push button switches down from the operator desk on manual mode, the augers or the conveyors work but intermittently. Their movement don't continues, they're moving and stopping like something is ceasing. Please any idea on fixing this?
  6. Pep Joe

    My big 14M steering system problem

    Thank you
  7. Pep Joe

    Bomag soil stabilizer s/n 101590041070

    It is almost three years now. I am sorry for giving this feedback this late. The problem of the no starting after new injector pumps that were broken were changed was "timing" The mechanic that overhauled the engine had to drop it down again from the machine and confirmed the timing. They...
  8. Pep Joe

    Bobcat S175 traction solenoid electrical circuit

    Thanks for your reply. The pull wire on this S175 comes from pin 87 of the traction pull relay. The relay is not getting current to its pin 86 to energise so that it can send pull current to the solenoid. The thing is I don't know what condition it should energies and I don't also know where...
  9. Pep Joe

    Bobcat S175 traction solenoid electrical circuit

    I am having a traction problem with a client S175 Bobcat. All fuses are having current, but no pulling and holding current to the traction solenoid. It can not move forward or reverse. I do not have the electrical schematic drawing to trace where the wires are coming from. Please help...
    • Pep Joe
    • Thread
    • #bobcat #trackloader #skidsteer #heavyequipment
    • Replies: 2
    • Forum: Skid Steers
  10. Pep Joe

    I need help with S175 Bobcat skidsteer electrical schematic. I have a traction problem.

    Sorry, I meant to say the traction pull relay is not getting current to its pin 86
  11. Pep Joe

    I need help with S175 Bobcat skidsteer electrical schematic. I have a traction problem.

    My client Bobcat S175 traction solenoid won't pull and hold even after pressing the "press to operate button" on the left hand panel and the cross bar is down. Usually when the "press to operate switch" is pressed when the cross bar is down, you will hear a sound that the traction solenoid has...
    • Pep Joe
    • Thread
    • #bobcat #trackloader #skidsteer #heavyequipment
    • Replies: 1
    • Forum: Skid Steers
  12. Pep Joe

    Cat 140H Forward and Reverse Clutch won't engage

    If you must power transmission solenoid with a battery for some testing, SIS recommended 12Vdc. Using 24Vdc will shorten the life span of the solenoids. Try to monitor with ET the shift lever positions on ignition as you move the transmission control (shift lever) through all the forward and...
  13. Pep Joe

    Cat D6K 247-9 abnormal update rate

    nice to hear
  14. Pep Joe

    What is the common nickname for Caterpillar brand equipment ?

    Thank you
  15. Pep Joe

    What is the common nickname for Caterpillar brand equipment ?

    Because my answer is "CAT" and this site won't accept it.
See more
Top