• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by pcarvillmiddletown

  1. P

    E215 fk 2003

    Ok so I’ve by passed the electrical end of the pump by screwing out the lock nuts yes she has power but killing the engine putting serious pressure on it when I boom in or crown the bucket it doesn’t do it but when I lift the boom is stalled the engine when I track it does the same i adjusted...
  2. P

    E215 fk 2003

    Ok I’ve bypassed the pump now there’s power on hydraulics but it keeps dead ending on the tracks and on dipper in and boom up what is the pump adjustment does it have to be moved from original when electrical is bypassed thanks
  3. P

    E215 fk 2003

    Cheers for that I’ll check that out in the morning will when screwed out the pump works at full capacity there was somebody working trying to screw pump pressure up before thinking this was the problem do u know the original pump settings
  4. P

    E215 fk 2003

    There’s 3 wires goin into them there on the right hand side of pump what colour is the feed and how would I reduce the current would a 6 volt battery wired to them work ?
  5. P

    E215 fk 2003

    Is it possible to put constant power to the hydraulic pumps to give them full pressure and put hand throttle on the engine and stopper cable ?
  6. P

    E215 fk 2003

    Ok I took ecu out and sent it to a man to look at he opened it and found nothing obviously wrong but there could still be a problem with it when the ecu is plugged out the digger still operates the same as when it was in is that any indicator of a problem do you know where I would get a ecu if...
  7. P

    E215 fk 2003

    Yes I think I’ve a bad connection or broken wire problem have to see this happen before would that be the problem for all the pump slow the stop start and the acceleration the ecu is perfect so what’s left wiring ? Can the pumps be manually activated to return to full pressure?
  8. P

    E215 fk 2003

    Yes but I got the ecu looked at and it’s ok yea the a fault on screen and can’t clear it or I’m not sure how to I’ll look tomorrow again see wat it says but some like cam or cun think its a ecu fault code but its not putting the correct power to the hydraulic pump or the stop start or...
  9. P

    E215 fk 2003

    Any help greatly appreciated. So I have a e215 I bought with very slow hydraulic movement on every control also the throttle doesn’t work and won’t turn of on key ive got the ecu checked out with nothing obvious wrong has anyone ever had this problem is there a wiring problem on engine loom of...
See more
Top