• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by OzXT40

  1. O

    Case 40 XT Newb with lots of Questions

    Motors are back in and we have done a test without load on the wheels. All is good so far.
  2. O

    Case 40 XT Newb with lots of Questions

    So finally had the seals replaced and picked up the motors yesterday. I contacted CASE myself and they were prepared to take the seal kits back if not the right fit (and unused) but he was confident they would. Seems he was right and I have no idea why it was such a problem to the mechanic. In...
  3. O

    Case 40 XT Newb with lots of Questions

    You have no idea how pricey in this country. Looking at $250AUD but better than a new motor. I found two of them available at $3800 AUD each which is a bargain. Really appreciate your assistance. The mention you have only used OE kits gives me a bit more confidence.
  4. O

    Case 40 XT Newb with lots of Questions

    Thanks for this tip. I have spoken with CASE in Melbourne and he is confident the seal kit on the CASE customer parts list is the correct one. The external shaft on my motor has 28 teeth as per the parts list but I noted there is also the drive shaft so I am hoping that will not confuse things...
  5. O

    Case 40 XT Newb with lots of Questions

    Thanks for the prompt response. The motor was inspected on site but with the mechanic now. He assures me the rest of it is in very good order and we have pulled the other motor off and will do the seals on it as well if we can get the kits. The information posted by @jacobb is interesting. I...
  6. O

    Case 40 XT Newb with lots of Questions

    I have the same motor and have been searching for the right seal kit. Found the Char Lynn seal kit for this motor and it appears to be the same code as the VIS 40. My repair man is not convinced these are the right ones and thinks CASE have an OEM seal kit which differs from the Char Lynn kit...
See more
Top