• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by outlawspeeder

  1. outlawspeeder

    580C Cutout Solenoid Repair

    Any one have a source for the Brake switch?
  2. outlawspeeder

    Used 16" bucket for Case 580C

    I have a 275 TIG (does arc welding too) and the compressor but my plan is to use a plasma torch that has a setting for this. If you ever get a chance to run a plasma torch you will never go back to carbon arc gouging. To put the new back on, I grind to clean metal. Tack in place using the...
  3. outlawspeeder

    Used 16" bucket for Case 580C

    Thanks I was planning 1/2" but if someone said thicker... Thanks again. I plan on starting the old cut out this weekend.
  4. outlawspeeder

    t595 loosing and regaining hydraulic function

    Filter? If it is plugging up.... When you added hyd is there a chance you mixed up crap off the bottom of the tank???
  5. outlawspeeder

    Used 16" bucket for Case 580C

    I pick up a 16" no teeth bucket for my 580. It looks like it has had a couple of cutting edges welded on over the years. The rest of the bucket is in good shape. My plan is to cut of the three layers of cutting blades. Right now the leading edge of the cutting edge is 2 inches. I haven got...
  6. outlawspeeder

    580 Buckets

    Yup. Looking for what fits on what. I keep finding buckets but I don't know if they'll work. To add to it when I ask the person selling the measurements are always not what I need to know. They may even know what it came off of.
  7. outlawspeeder

    580 Buckets

    Is there a list of what buckets fit what model of 580? Or is there a spec sheet for them to make it easy when shopping? Like a bolt pattern checker for Chevy wheels? i.e. will a 580C fit a 580K?
  8. outlawspeeder

    Anyone try the aftermarket 580 brake slave cylinders?

    I did Slaves and masters from Ebay. I also relined the out pad but not the sides. Now I have to go back in and do those.
  9. outlawspeeder

    Looking for smooth blade for 580C backhoe

    O need to do some smoothing and prices are nut. I look for a bucket I could modify...$$$$ So if I get two old teeth and weld a flat blade to it... Anyone try this as a cheap option. I have to cut in a drain hose but can only pull up at 90degee. Its next to the house.
  10. outlawspeeder

    580C swing foot pedals - spring return?

    1st was it running? Some of the centering is via Hyd pressure.
  11. outlawspeeder

    Case 580C backhoe shuttle box install

    Back the Shuttle out some. Then spin the Torque converter till it slides aft into the shuttle and locks into the the pump in the Shuttle. The Torque converter has to a line with the pump. Its about 3/4". You'll know when it slides in. I use a piece of bent metal bolted to the pan to hold...
  12. outlawspeeder

    1979 Case 580C Backhoe Left Drive Tire Won't Turn

    The links I add above?
  13. outlawspeeder

    1979 Case 580C Backhoe Left Drive Tire Won't Turn

    I put a normal 12 volt in mine. Drilled two holes on each side of it. All thread up to a flat 3/4 wide across the top to hold it in place. You can get to the brakes from below. Pulling the floor will make it easer for old guys like me to have someone above help lift the brake cover. When...
  14. outlawspeeder

    1979 Case 580C Backhoe Left Drive Tire Won't Turn

    I watched you youtube. Video 1 1. On the left frame the plug with the sight gage. Pull the plug and put in a 90 deg and cap from your local Lowes. It will make it easier to fil. It say hyd fluid above it. 2. What you say is hyd (5:00) with the T handle is shuttle transmission check with it...
  15. outlawspeeder

    Forks for a Case 580C

    I could but that is a lot more money than 150 dollars for a set of forks to the hooks and some welding.
See more
Top