• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by ojetismo

  1. O

    CAT 289D3

    I am speechless...!!!!!! That's like the holy grail for us right now!! :) Seriuosly, I know I'm repeating myself too much but I want to say it either way. THANKS!! I've asking all the main brands for this information, because we were developing this new solution and it has been maddening... And...
  2. O

    CAT 289D3

    Ohhh!! That's a very nice web!! A lot of valuable information there! Thanks!!
  3. O

    CAT 289D3

    We received the same information, K to activate the High Flow. And B to ground. Finally, we did some tests, it seems that the PIN'S C and D are activated by two buttons on the RH Joystick. So we will use those. Our machine has a solenoid Valve to divide the flow between the hydraulic motor and a...
  4. O

    CAT 289D3

    Now at least I know that the PIN named as "B" is negative pole... I'm trying to get information from my client but no success at the moment. Our mulcher has this requirements: -- 96-106 l/m -- 260 bar I think they should work on the High Flow. But not sure. Thanks NIGE!!
  5. O

    CAT 289D3

    Dear Nige, Thanks for the attached document. I will ask my client if he can provide me that information. But he is from another country, and the hole process has been difficult to say the least... :) By the way, I am amazed that I could find this Forum and people like you so willing to help...
  6. O

    CAT 289D3

    I work in an mulcher fabrication company, and we need this information to build the female connector that matches the one in CAT 289. And I called the CAT Spanish distributor and they aren't capable of give any information... Sadly. And Thanks Chrisso for answering me!!
  7. O

    CAT 289D3

    Hi all, I'm new here, it is my first post. I registered because I've found very helpful information about CAT 289D3. The thing I couldn't find is the electrical diagram of this connector: I need to know which PINS work with the buttons on the joystick. Also I need to know which is the...
See more
Top