• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

OFF's latest activity

  • OFF
    OFF replied to the thread Sullair under speed problem.
    I've seen that same thing on a Sullair 375, it was the alternator. The tach/speed signal comes from the alternator on most mechanical...
  • OFF
    OFF replied to the thread Z45-25 rpm problem.
    Only on platform? Gas or diesel?
  • OFF
    OFF replied to the thread Ford LSG423.
    The LRG423 was a 2300cc engine based on the engine commonly in various Ford cars thru the 70's and 80's. See the list of vehicles in the...
  • OFF
    OFF replied to the thread Genie Z45/25 boom lubrication.
    I remember when we saw our first Genie. We all stood around and laughed at the non-greaseable "plastic" bushings on all the pins. We...
  • OFF
    OFF reacted to willie59's post in the thread Genie Z45/25 boom lubrication with Like Like.
    No grease or lubricant. Those wear pads are made of UHMW plastic which has a very low friction coefficient comparable to Teflon. As OFF...
  • OFF
    OFF replied to the thread Genie Z45/25 boom lubrication.
    Grease attracts/holds dirt and sand, which make things worse over time. I believe they were made to be left dry.
  • OFF
    OFF replied to the thread S-85 Boom Won't Retract.
    Genie is very good at sharing info. Click the link below Genie
  • OFF
    OFF replied to the thread HYSTER H 3.50XL.
    probably an electric shift transmission. Try and locate the shift solenoids (coils) on the transmission. swap coils and see if your...
  • OFF
    OFF reacted to funwithfuel's post in the thread Sullair under speed problem with Like Like.
    Have you measured engine speed? Have you run off an alternate source of fuel. Compressor tanks are the most neglected filthiest...
  • OFF
    OFF reacted to heymccall's post in the thread Miller Big Blue 300 no power with Like Like.
    From here... http://www.manualsonline.com/support/miller-electric/welding-system/my-big-blue-300-has-no-power-no-voltage--has-a-cod-5492637
Top