• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Newguy

  1. Newguy

    Hiab 335K crane leaking

    Here's what the cylinders assembly looks like partially disassembled, and a photo of the damaged o rings.
  2. Newguy

    Hiab 335K crane leaking

    Hi again everyone, I thought i'd post an update on this job, eventually i did find some Hiab diagrams of the crane extensions but with zero instructions or details, i managed to remove the boom cylinders as an assembly, there were two cylinders leaking between the cylinder head and the...
  3. Newguy

    Hiab 335K crane leaking

    Crane Operator, thank you very much for your informing reply, I don't have much experience with cranes in general all i did in the past was replace hoses and i was going to install a remote assembly on a Hiab 335K like the one in question last year that it. After one week of searching i figured...
  4. Newguy

    Hiab 335K crane leaking

    Thanks for the tip Dave, i don't have many options anyways so i will talk to them on Monday.
  5. Newguy

    Hiab 335K crane leaking

    The website had no Crane manuals, you need to contact Hiab to set up an account, i havn,t done that yet but iam thinking likely this a dealer only service and we're a small operation. Thank you.
  6. Newguy

    Hiab 335K crane leaking

    Thank you for the reply, that sounds about right because i asked the local dealer yesterday a little after i posted this thread, a tech told me that Hiab actually never made any manuals :confused: and that all the service expertise their techs have is just accumulative know how from years in...
  7. Newguy

    Hiab 335K crane leaking

    Hi, iam trying to repair some leaks on a Hiab 335K truck mounted crane and iam in need of the repair manual, i was told by a retired crane tech that Hiab never produced any manuals, is this correct because it doesn't sound right to me that the most well known truck mounted crane company won't...
  8. Newguy

    Hi, do you have a service manual for Hiab 335-4CL crane please ? my email is...

    Hi, do you have a service manual for Hiab 335-4CL crane please ? my email is: fityfa@hotmail.com, thank you.
    • Newguy
    • Profile post
  9. Newguy

    Daewoo G25E-3 throttle & tranny issues

    Hi everyone, I am working on a 2004 Daweoo G25E-3 with a Mitsubishi G424E engine, S/N: G9-00159 LP ( Propane), when i first got the machine the engine was not running and i was told by the previous owners also that it had a little transmission concern before she quit running. I checked for...
  10. Newguy

    Hyster H35FT no spark

    Hey tool_king, thank you very much but i already found the manuals, my neighbor had 2 machines down so i had to try to speed things up and was able to locate the issue, i took a good look at the schematics and started testing for the code possible causes and found no broken / shorted circuits at...
  11. Newguy

    Hyster H35FT no spark

    Hi tool_king, it's ZWANTEK aat hawt mayl doot coom, hope the website will allow it this way :) thank you very much for your reply.
  12. Newguy

    Hyster H35FT no spark

    Hi again, i just realized i wrote the serial number missing a chunk, the full serial number for this machine is : F001V04074K, i also did some further testing and found the little 2 wire plug on the shutoff valve has power with the ignition at the ON position, but the power flashes few times and...
  13. Newguy

    Hyster H35FT no spark

    Hi everyone, iam trying to diagnose a no start issue on a forklift that belongs to my neighbor, it's a 2011 Hyster H35FT propane forklift with a 4cyl. Mazda FE 2.0L engine, the machine was running fine when parked the previous night, the next morning the guys try to start it and it will crank...
  14. Newguy

    Cat 950F II error codes

    Thank you very much for the procedure, i will try to get on it sometime this coming week and i will revert with the results.
  15. Newguy

    Cat 950F II error codes

    Hi Mark, thanks for the info, by looking at the break down of the codes almost all of them are related to the repairs i did on the machine back in the day, i also looked at the dash and there's a " SERV CODE" where you said it might be, but i want to mention that the codes are not appearing at...
See more
Top