• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by nevinsteiner

  1. N

    Kubota 95-2 9302 air in fuel code and dies

    Is this something an injector sticking open could do?
  2. N

    Kubota 95-2 9302 air in fuel code and dies

    Could there be a problem in the injector pump or beyond that would cause it to throw code 9302? There are no visible leaks on the machine and the fuel system is good to the injector pump. We swapped the old fuel system onto the new engine. The machine runs perfectly fine working. If I rapidly...
  3. N

    Kubota 95-2 9302 air in fuel code and dies

    Working on a new to us 2019 95-2 Kubota We replaced the engine because it had no oil pressure. Misc tribulations, but finally got it running. Deleted DEF system. After running a few hours, it threw code 9302, air in fuel. Restarted and ran fine. Several hours later, it's back in the shop...
  4. N

    Kubota 95-2 timing

    Yes I took the idler gear out thinking the timing was lost already. Then of course realized it wasn't. Thanks for the info! Pulling the front cover is not bad as I thought it would be. Got it all lined up with gasket maker drying for a test tomorrow morning. ozarkag thanks for pointing out those...
  5. N

    2021 cat 299d3 idle issues

    The spring was broken, as in the first pictures, and we replaced it. If anyone needs this spring for the injection pump, we have that one in stock.
  6. N

    2021 cat 299d3 idle issues

    We had this very issue on a 299 D3 and it was a froze up pump. Got a used one for a grand on ebay and it works good again.
  7. N

    Kubota 95-2 timing

    I've been told there are 2 ways to time it, one involving pulling the valve cover and #1 injector, the other involving pulling the front cover. Are there other options? Which method is fastest?
  8. N

    Kubota 95-2 timing

    I have a 2020 95-2 we replaced the engine on. We timed it when we had the head off, but didn't tighten down the nut on the injector pump and it sheared the roll pin after we started it. So we need time it again. We made the mistake of pulling the idler pulley. Is there a way to do that without...
  9. N

    Kobelco SK210 Year 2013 in Texas

    Hello i Have a Kobelco SK210 that is throwing the code D063 and can you help me find the High Arm Speed Proportion valve
See more
Top