• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by mwelding

  1. M

    Working the National 1300A

    How do you rig to the chains in the pool 5/16” shackles?
  2. M

    TMS300 slow hydraulics

    I replaced both pumps on my Tms300 in October. They were $1740.00 each right from Walter Payton.
  3. M

    Old conventionals at work

    Looks like your outrigger control box got lucky.
  4. M

    Pat ds 350 problems

    Thanks, yes it’s a tms 300b.
  5. M

    Pat ds 350 problems

    Well narrowed it down to the console main board is not transmitting. So would you try to get a board for it or upgrade the whole thing?
  6. M

    Pat ds 350 problems

    Its the standard ds 350. I just got off the phone with Tom at Basil and he gave me a different # for someone who knows the system better. I’m hoping he calls back to go through more checks. I was really hoping it was just the wires.
  7. M

    Pat ds 350 problems

    My display in cab reads error code 94. So I replaced the wires from Central unit to display. Still says error 94. Any help on where to look next. Thanks
  8. M

    Tms 300b boom play

    10-4 been doing it a lot lately in cold Michigan.
  9. M

    Tms 300b boom play

    Same thoughts here since it used more by running the fly out. Thanks
  10. M

    Tms 300b boom play

    Also on same crane the outer mid goes in and out slower then the inner mid. Is that normal? And thanks for the help.
  11. M

    Tms 300b boom play

    How tight should I have them.
  12. M

    Tms 300b boom play

    I was boomed all the way out today. When I would stop from swinging it seems like the boom moves too much side to side. Is there wear pads at the end of the boom sections? The crane is s 1987 with 600 hrs.
  13. M

    Grove tms 300b telescope cylinder removal

    All is well. Cylinder rebuilt, and boom put back together. Thanks for all the info.
  14. M

    Grove tms 300b telescope cylinder removal

    Ok thanks. I have the same 105' main. Getting ready to pull out today. Is there any tricks with replacing the seals or pretty standard.
  15. M

    Grove tms 300b telescope cylinder removal

    Crane operator do you remember the weight of the boom on your tms 300?
See more
Top