• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Monte Nelson

  1. Monte Nelson

    1985 Champion 720A - will not engage in F or R

    Yep your right it is over 12 volts and close to 13. Thank you
  2. Monte Nelson

    1985 Champion 720A - will not engage in F or R

    Thank you. I not a wireing expert but it looks like I need to reach out to that person. You have been a great help thanks again!
  3. Monte Nelson

    1985 Champion 720A - will not engage in F or R

    Great info similar to my issue. I have replaced the neutral safety switch and still have the same issue? Great info and thanks.
  4. Monte Nelson

    1985 Champion 720A - will not engage in F or R

    Thank you. I just put a new one on it reads 12 volts when engine running.
  5. Monte Nelson

    1985 Champion 720A - will not engage in F or R

    Thank you! I checked voltage on new replacement switch and changed it out as well. Still no luck. Thank you
  6. Monte Nelson

    1985 Champion 720A - will not engage in F or R

    Yes it is. Thanks for your help. The error code was E 4.2. I checked the manual and it stayed neutral safety switch. I have replaced it and checked voltage as well as the neutral safety relay.
  7. Monte Nelson

    1985 Champion 720A - will not engage in F or R

    The 720A Motor runs (when you bypass the neutral safety relay) and the hydraulics work but when you engage to move forward or reverse the grader doesn't move. I have replaced the following: Neutral safety switch and relay Checked with ome meter all transmission cartridges and replace one with...
Top