• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Midnightmoon

  1. M

    Best GPS for work truck

    harnds free calls trafic and weather through phone. wifi for map updates
  2. M

    Best GPS for work truck

    garmen66 provides most of what i need. it alows addresses to be sent to gps from phone. stand a lone gps is way better then a phone for everyday use. my phone is bery busy while i drive via hands free. what i need now is to get my laptop controlled by voice
  3. M

    JD 700k CAN resistance

    4 codes but only one relevant. Non are active only past codes. (SDM 3156.9) (ECU 97.3) (SDM 2141.9) (SDM 3156.9) SDM 3156.9 Loss of can comm with ehc. I suspect when my GPS system is working at full capacity its overloading the IGC network and JD lack of proper resistance cant handle it and...
  4. M

    JD 700k CAN resistance

    of course it has gps control. Im the gps tech my system is fine. With my system disconnected these are my readings. JD is blaming the gps system and I showed JD tech its not my system. The jd side is the issue. I suspect the eh controller as well is 10 and 11 can high and low? I could realy use...
  5. M

    JD 700k CAN resistance

    eh controller has to have a resistor in my mind and on this machine its junk
  6. M

    JD 700k CAN resistance

    issue is igc resistance and voltage are off an h and low are 1.7 volts and resistance is crap a 1ohm but when you cycle key it pops up to 120 for a moment then crashes back to 1ohm. there has ro be 2 resistors in the igc r3 is good but can network is well.......unhealthy
  7. M

    JD 700k CAN resistance

    testing at r3 with resistor out i get 1.7ohms key off. cycle the key and for a moment i have 120ohms then back to 1.7. Where is the second resistor? with resistor in at r3 i never have 60 ohms. I suspect 2nd resistor is bad but where is it? John deere tech had no clue but he thought it must be...
  8. M

    JD 700k CAN resistance

    sn 1t0700kxvee255611
  9. M

    Best GPS for work truck

    looking for reviews on GPS for work trucks. I would like to find one i can send addresses from my phone to the gps and that has speed warnings. if im speeding x amount over speed limit it will alert me. my old gps needs to go and want some additional fearures
  10. M

    JD 700k CAN resistance

    while testing CAN resistamce on a 700K it appears the can resistors are electeonically controlled by the ECM on that given CAN network but i need confirmation. while testing resistance at the dash display the display has 50 ohms when unplugged and the wiring to it acted odd. 1.7ohms with power...
  11. M

    SITECH

    Any Sitech technicians on here? I have a few questions on the system. Im looking for more information on capabilities and limitations. Any good sources for more info. Sitechs site is limited
  12. M

    Svl95-2s def code9519 madmadmad!!

    Certainly delete what ever emissions you want my take is if I or my shop work on it I can be fined personally. If you get pulled over at a weigh station or have epa show up at a job site be ready for heavy fines no lawyer will get you out of a fight with federal law. 2 skid steeres with deleted...
  13. M

    any jobs? ill travel

    I have work in upstate New York?
  14. M

    Ny heavy equipment mechanic wanyed

    Union job great pay and benifits
  15. M

    Help wanted

    Can we post help wanted ads for employees on here? I've been trying to network with everyone I've worked for in an effort to find some workers. Thinking I need to think outside of the box to find good help because as everyone knows finding anyone has become very hard.
Top