• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Maxpower1203

  1. Maxpower1203

    2011 Case Tr270 started and ran then stopped

    Changed all filters, hydraulic oil was almost empty, cleaned the level Guage saw nothing there, drained out only 4 liters hydraulic fluid. I put 28 liters 10w-30 oil in , and changed engine oil as 10w-30, in and out air filters, now machine no more alarm. Easy to start and ran half hour but...
  2. Maxpower1203

    2011 Case Tr270 started and ran then stopped

    Today the dealer send me all filters and oil. According to my manual engine oil is use 10w-30. The dealer gave me 15w-40 for engine oil and 18liters 10w-30 engin oil replace hydraulic oil. Also according to the manual the hydraulic system is 31liters . Do I need to buy more 10w-30 engine...
  3. Maxpower1203

    2011 Case Tr270 started and ran then stopped

    Thanks alrman I just bought the machine this Friday, 31k $C 1927 hours from Case dealer. I went there checked the track and undercarriage and engine oil and any damaged, tested drive no problem. They didn't cleaned the machine all mud and gravel which stuck inside undercarriage undercarriage...
  4. Maxpower1203

    2011 Case Tr270 started and ran then stopped

    Thanks KS, I will change all filters and see . Today, I disconnected the heavy duty gripper attachment and switched to the bucket, clean the undercarriage found 2 big rocks stuck in backside of the undercarriage. After I cleaned everything and started the machine, kept cranked 2-3 times...
  5. Maxpower1203

    2011 Case Tr270 started and ran then stopped

    my 2011 Case skid steer Tr270 started and ran then stopped. After I started the machine and waited 10 minutes nothing was wrong, but while i started to run 2 to 5 minutes then it stopped. Mostly it stopped while i turning around. After the machine stopped, could not start up easily, always had...
Top