• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by masber2000

  1. M

    CAT 239D EGR Valve Error

    Hello- Due to sickness, my 239D has been sitting unused for about 4 months. I was finally able to start it back up last week. When starting, I got the following error message, along with loss of power when revving the engine: 2791-10 Engine Exhaust Gas Recirculation (EGR) Valve Control...
  2. M

    CAT 239D creep mode not working

    Will do, thank you!
  3. M

    CAT 239D creep mode not working

    It says "The machine must be in NEUTRAL to change from non-creep mode to creep mode and vice versa.". How do I put the machine in neutral?
  4. M

    CAT 239D creep mode not working

    I'm going to replace all of the fuses in the fuse block to see if that helps.
  5. M

    CAT 239D creep mode not working

    No it's not. Do I have to have an implement attached (I don't think I do)?
  6. M

    CAT 239D creep mode not working

    Does the creep mode need to have 2-speed? I don't think I have that.
  7. M

    CAT 239D creep mode not working

    Thank you! I'll review and start testing. I actually purchased a copy of the O&M manual but it's so unwieldy, it'll take me a bit of time to go through it. I don't think I have rocker switch #3 on my unit, I only have the float switch: I assume that I don't have this function on my unit...
  8. M

    CAT 239D creep mode not working

    Serial number BL901153. Thank you!
  9. M

    CAT 239D creep mode not working

    Hello- Just purchased a used CAT 239D and am in the process of checking/inspecting all functions. I can't seem to get into creep mode after pressing the bottom left button on the LH joystick. Are there any inspection points on the machine that I should know about in order to diagnose the...
  10. M

    CAT279 backup camera

    This is the same thing that's happening with the camera on my 239D loader. Any help resolving this would be most appreciated.
Top