• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by mante

  1. M

    Cat wheel loader 962K DPF Problem need to help

    Gents, I have problem with DPF of cat 962K wheel loader engine C7.1 SN C7R12025 How I can troubleshooting this problem Codes E992 (3) E995 (2) E995 (3) E1050 (3) E2083 (1) Thanks in advance
  2. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    I got it boss Thanks
  3. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    I appreciate your work on this information, because I was thinking the problem may be in ECM, this information prove that signal voltage is true, now all the voltage values in sensor supply and the signal is correct. I will follow your steps in to find the problem. From yesterday I will account...
  4. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    Ok Bro .... you will do a big favor for me ..... really it's confuse me the supply voltage is 24 volt but the signal voltage is 5 volt not as per instruction says should be 8 + - 0.5 Vdc Thanks for help
  5. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    I have one question about this test 737-4 i got this at logged and I did this test I found the voltage is 5 volte less than the suspected 8 volte.... What do you think for this test ? Thanks Boss
  6. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    The supply voltage is 24v The signal voltage is 5v from harness sensor connector OK Boss
  7. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    Thanks a lot
  8. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    Thanks for reply and explain But The 5 volt is not from supply voltage ..... is from the signal wire G746 and C491 should be 8 volt for both signal that supplied by ECM
  9. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    Hi, I pass through the all stepes and I found problem the voltage between signal and ground contacts at the machine harness connector for the sensor is 5 volt for Position Sensor (Left Brake Pedal) and the park brake pressure sonsor .... The Logged codes recorded 737-4 737-13 .... Do you...
  10. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    Don't worry I will do it Thanks Boss
  11. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    Ok Boss I will use this Procedure tell me if it's right ..... Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate Media Number -UENR1625-01 Thanks
  12. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    Thanks for reply Ok ,but do i need to calibrate to erase the code .... note: the wheel loader now is not moving.
  13. M

    I have problem with 966H Caterpillar WHEEL LOADER Neutralizer Pedal Position Sensor

    Hi All, I have a mysterious problem with 966H Caterpillar WHEEL LOADER BJ601568* that is need to after 3 or 4 weeks to re-Calibration with code 737-13 Neutralizer Pedal Position Sensor : Out of Calibration .... Actually they changed Pedal Position Sensor and they called me to investigate the...
  14. M

    CAT 3512B Genset

    Did you get the info or not yet?
  15. M

    MAN truck 2015 40.400

    Hi guys, I have abnormal sound from MAN truck 40.400 2015 Engine type D2066/400 and I couldn't understand Why some cylinder are negative and 2 positive? Fuel volume correction cylinder 1 6.10 mg/Hub Fuel volume correction cylinder 5 4.00 mg/Hub Fuel volume correction cylinder 3...
See more
Top