• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Malingos

  1. M

    Case TR270

    Hello everyone, I am looking for anyone that has any links on info for removing high pressure pump from TR270. Also any information for fuel system pressures. I have narrowed down to pump not building enough pressure but don't have any specs on it just going by what I'm seeing. Relief valve is...
  2. M

    Ditch witch gear box won't turn

    Hello everyone, ok I have another project that's kicking my ass. It's a Ditch Witch JT2720 mach1, so the issue I'm having is that the gear box that turns the pipe Does Not turn either way. All other functions seem to be working well, but I don't know where are the coils/solenoids located, that...
  3. M

    Need Advise! JLG 2658e3

    Hello Josh, very good info on the issues and good that you checked voltage at several times. From what I know ,is that the chargers are commun and do go bad. You could charge batteries individually and then hook all up and see if they stay charged or they go back down, but most likely it'll be...
  4. M

    Ingersoll rand roller

    I did remove the plug on both sides and drain plug on the middle of the diff and didn't see any metal/debri at all. Have removed the pump and going to have it checked at hydraulic shop. But as I mentioned, it seems to be an issue with the fwd/reverse lever. So I hope I'm right or ill have to...
  5. M

    Ingersoll rand roller

    So it seems that something damaged inside the pump, locks up when going on reverse mostly and rattles really bad
  6. M

    Ingersoll rand roller

    Does any one knows if this has a rubber dampner between pump and back of engine? Noise seems to be coming from that area
  7. M

    Ingersoll rand roller

  8. M

    Ingersoll rand roller

    Ok so I'm back on this machine, so the park brake solenoid is mounted to the left side of the pump. Operator also told me they ran it today and when they run it in low idle it will work ok until about an hour. They say it seems to get warmed up and starts acting up. Does that make any sense?
  9. M

    SD-100F Pro pac

    Ok thanks, I will check it out. You also mentioned about pressure, what specs am i
  10. M

    Ingersoll rand roller

    Ok u will do that, that machine is east Texas and all jobs for this week seem to be out west. Might get back out there Saturday but all info is welcomed.
  11. M

    Ingersoll rand roller

    Vibratory works fine, I can actuate it with button on handle. I was told to insert the lock and attempt to move fwd and at the same time turn left to see if pumps are working. They seem to work fine but it was weird that it would jump like that. Do you have any type of manual. Maybe I should...
  12. M

    SD-100F Pro pac

    It does have the rear diff, it does have button for parking brake . You think its electrical issue? How does the e brake mechanism work? Electrical to hydraulic?
  13. M

    SD-100F Pro pac

    Ok gentleman I am in need of some help, I have this IR roller that runs great but at times it acts like it locks up and won't go fwd or reverse and when it releases, that sucker jerks really bad. At first it began doing it whilst going up hill with drum on but now it does it on flat ground...
  14. M

    Ingersoll rand roller

    Anyone know much about this rollers, have a SD100F Pro pac. That just won't go up a small incline and sometimes on flat ground it trashes a while for it to go forward or reverse and it Jerks really bad when it does. Maybe main pump?
  15. M

    Komatsu

    Hey guys thanks for the info, sorry I m getting back to yall so late. Well I did start the rebuild process and I have looked at the link you shared epirbalex, thanks. I am going to look and download a repair manual with torque specs and all.
Top