• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by m1008

  1. m1008

    Case 850D belly pans removal

    Used a floor jack on the front ones, pallet forks and cordless impacket worked good for the rear
  2. m1008

    Cat 924h steering cylinder

    Steering cylinder from our 924h cat loader we had this rebuilt and we're keeping it as a spare for less down time. Purchased a new machine so would like to get this out of our shop. 1200$ north central pa
  3. m1008

    Mustang mtl20 glow plugs

    you can hook a test light to the positive on the batter and touch the spot on glow plug where the wire hooks if it doesn't light up it's bad
  4. m1008

    Mustang mtl20 glow plugs

    Yes it's the same machine as the tl140
  5. m1008

    Mustang mtl20 glow plugs

    Lol I bought it that way, I would of changed it a LONG time ago. I think this machine had a hard life but it runs and drives great so I'm hoping I can get some use out of it
  6. m1008

    Mustang mtl20 glow plugs

    Doing some work on my mustang mtl20 getting it ready for spring for a few jobs I have lined up, changed fluids and filters, plus changed a sprocket and flipped the track. Last thing on my list is getting the glow plugs working, I have no power going to them, checked all fuses and followed wires...
  7. m1008

    85xt drive motor

    Ya I had a pressure guage and flow meeter on it and everything was in spec according to my manual, except left drive motor was loosing too much flow when I put it under load. supposed to only drop like 2 GPM and witch right side did, but left would drop over 10gpm
  8. m1008

    85xt drive motor

  9. m1008

    85xt drive motor

    Thanks for the advice, guess I got some thinking to do, I bought machine to dig my basement and do landscaping for my house I'm building witch basements done. Might be farther ahead selling it broke and cutting my losses. It's only got 2200 hours on it so it really sucks to have this big of problems
  10. m1008

    85xt drive motor

    Well got it going and it didn't fix it. Anyone know of a place to get a drive motor cheaper than case dealer? When I was talking to case dealer they were talking like I'd have to get the parking brake assembly too beings mine is an early model. Also any other ways to be 100% positive it's the...
  11. m1008

    85xt drive motor

    Put new seals in pump installed pump along with new filters put it back together fired it up and my charge light is on so I shut it back down, does the system need to be bleed when first started?
  12. m1008

    85xt drive motor

    OK thanks now before I start cleaning stuff up. Would it be a bad idea to use a dremal and cut a line in housing to mark it for aliment? I'm thinking my paint market lines will come off when I start cleaning
  13. m1008

    85xt drive motor

    What would be the best stuff to clean everything with? I was originally thinking brake cleaner then soak all the clean parts in new hydraulic oil before assembly. Any recommendation of a better way I'm all ears
  14. m1008

    85xt drive motor

    No I didn't remove the pumps, I pulled the drive motor parking assembly as one out the front. Yes I marked the housing. Although I need to find something better to mark them with cause my lines were fading when I was cleaning the housing up
  15. m1008

    85xt drive motor

    There rubber piece about 3/4 inch long in groove where driver pointing
Top