• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by latiff"

  1. latiff"

    How to access power mode in a cat 312cl

    Ok ,I'll just browse through the menu and see if I'll stumble on something
  2. latiff"

    How to access power mode in a cat 312cl

    Good morning team,the last button on the left side of the B series monitor is for power mode, 1,2,3 to select the desired working speed of the machine. 1 is slow(for heavy lift) ,2 is fast for normal operations, 3 is faster .How can I access this function on a 312cl
  3. latiff"

    Link Belt LS4300 CII no travel

    At this point you should check if the travel spools are still in the main control valve. But know that even with spools in neutral theres still pressure in the main lines,bucket, lifting, arm ,swing and travel, but not enough to mobilize then until the spool are shifted. If you loosen your boom...
  4. latiff"

    Link belt LS 3400 excavator control valve issues

    Thanks, isn't there something with a detail as attached. I need to identify and rearrange the spools accordingly . Thanks
  5. latiff"

    Service Manual Trading Post

    Old thread I know,but does anyone have a service manual for a link belt LS 3400 SN :: E719-1343
  6. latiff"

    Link belt LS 3400 excavator control valve issues

    Good day team, so I was called to work on this link belt LS 3400, initially it didn't have tracking power. It wouldn't steer if one track was operated, but moves fine with both . So a technician came and worked on the pump,problem didn't go away,so went onto the control valve to inspect spool...
  7. latiff"

    Cat 950F series 2 wont engage forward nor backward ,just sitting comfortably

    Ok,I'll check for it
  8. latiff"

    Cat 950F series 2 wont engage forward nor backward ,just sitting comfortably

    The ET diagnostic port is at the relay panel in the engine compartments, yes?
  9. latiff"

    Cat 950F series 2 wont engage forward nor backward ,just sitting comfortably

    I've seen those set of wires before, are they the ones behind the operator's seat? Just above the ECM?
  10. latiff"

    Cat 950F series 2 wont engage forward nor backward ,just sitting comfortably

    Tried two other ECM, still the same thing. You're right Nige,ECM now shows 650 F02 error code. This translates to "harness data erratic, intermittent or incorrect "
  11. latiff"

    Cat 950F series 2 wont engage forward nor backward ,just sitting comfortably

    Ok,am going to get the smaller aluminium ECM that doesn't have a display, let me rule out ecm as possible fault
  12. latiff"

    Cat 950F series 2 wont engage forward nor backward ,just sitting comfortably

    What am I expecting to see? I've put an ecm from another 950F series 2 Machine now moves, and pushes sand with all the power in the world at start up,but put it to reverse to come back with the bucket of sand it won't move, only attempts to. But if you turn her off and on almost immediately, she...
  13. latiff"

    Cat 950F series 2 wont engage forward nor backward ,just sitting comfortably

    Good morning from here team,So I went back to the machine with another transmission oil pump,installed it and machine wouldn't even move again just making an attempt even a high revs. So I gauged pump at filter housing and it hit 360- 400 psi depending on rpm. So I uncovered the solenoid and...
  14. latiff"

    Cat 950F series 2 wont engage forward nor backward ,just sitting comfortably

    Oil used is SAE40 ,how do I do the wire trick? All filters have been changed when previous technicians were troubleshooting why it wasn't moving. Oil is new too,strainer looks good and no metal particles on magnet. I'll check suction lines and tank. I'll test for pressure, thanks
  15. latiff"

    Cat 950F series 2 wont engage forward nor backward ,just sitting comfortably

    So I travelled to the site yesterday with another transmission shifter that was parted out from another machine, installed it and the machine now engages all 4 gears in both forward and and reverse. Nige, you were right. There wasn't any service code,all were logged codes except for F02 621(down...
See more
Top