-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Recent content by kunze
-
K
Roller will not move please help
I just got back to looking at it yesterday and i replaced the 2k resistor with a 1.5k and got the brake light on the instrument panel to go on/off with brake switch. the electrical seems to be ok. still no action in forward or reverse. is there a way to see if the on board controller or ECU has... -
K
Roller will not move please help
Awesome man!!! Thank you! I will let you if that was the issue on Monday. Thanks again!! -
K
Roller will not move please help
Chuck I appreciate the input and schematic the seat switch is good. By chance do you have the schematic showing the resistor that is in line at the connector for the parking brake switch? -
K
Roller will not move please help
I have a dynapac cc1200 roller that will not move forward or backward. It starts up ok and runs fine just won't move. It sat for about a month and a half it was working just fine when we parked it the parking brake light goes on when you turn the key and then goes out we replaced the parking...