• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Kobelco ireland

  1. Kobelco ireland

    Kobelco / New Holland E130 / 135 Pump p2 Error Code

    Is your pump p2 error code related to p2 pump sensor (se) or p2 pump solenoid (psv). If its bogging down the engine I will assume it's the solenoid fault you are getting. If after swapping the wires the fault changed to p1 psv them your solenoid is faulty
  2. Kobelco ireland

    KOBELCO SK 210 -6E

    First thing I would try is swapping the arm in and arm out port relief valves and see if that makes any difference.
  3. Kobelco ireland

    KOBELCO SK 210 -6E

    How fast does it fall. Does it fall to horizontal position. Does it have a hose burst valve on the cylinder
  4. Kobelco ireland

    Kobelco sk125-2 start problem

    20411 is dbv valve open. I will have to root around go find other code
  5. Kobelco ireland

    Hydraulic Oil Made from Recycled Oil

    A costumer of mine bought two barrels of recycled hydraulic oil from a local company who had bought said oil in bulk and rebranded it in there name. He put the recycled oil in both his diggers 200 work hours later the hydraulic pump in his 210 exploded into a thousand pieces. When I removed the...
  6. Kobelco ireland

    Kobelco sk210Lc hard to start when engine is warm

    Is it a - 6e with zexel injection pump if so seen it many times your injection pump needs to be over hauled. A quick and easy test is after warming up machine pour 5 gallons of cold water over the injection pump and if it starts easier the injection pump is in trouble
  7. Kobelco ireland

    Kebelco 120lc mark 4

    I worked on one same as this a few weeks ago. Needed a new key switch, new lever lock solenoid and set of seals for the top ram ordered parts from main dealer and they had them all the following day so getting most dealer parts should not be a problem.
  8. Kobelco ireland

    Kobelco SK140-8Lc Error code 20411

    If you search kobelco sk140 fuel pressure issues on search function here there is a thread covering this fault code
  9. Kobelco ireland

    2017 ED160 throwing Code P1621

    It will have to be in machine to clear fault afaik
  10. Kobelco ireland

    2017 ED160 throwing Code P1621

    Code p1621 is izusu engine control module internal memory, probably caused by the flat batteries and will have to be cleared using dealer softwear as far as I can remember
  11. Kobelco ireland

    hitachi fh 135 sump bung help

    This machine has an iveco engine so maybe you could try iveco dealer
  12. Kobelco ireland

    hitachi fh 135 sump bung help

    Part number would depend on the thread of fitting. Most motor factors or hydraulic shops should be able to supply you with a plug if you bring in the old one with you
  13. Kobelco ireland

    hitachi fh 135 sump bung help

    What you have is a quick drain plug. There is a pipe that screws onto it to drain the oil
  14. Kobelco ireland

    hydraulic hammer is weak

    You might need to manually adjust the circuit relief pressure or swap over the relief valves on that circuit in case one is faulty
  15. Kobelco ireland

    Slow moving hydraulic

    I will need a model and year to be more pacific but sounds to me like a sticking straight travel solenoid
See more
Top