• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by kevinc1650

  1. K

    310J Trans Problem

    What would cause the hyd tank fluid to fill up the trans on a 310J? The trans fluid is coming out of the dip stick tube causing the trans to be way over filled. I have lost all that fluid from the hyd tank side. Trying to figure out how its getting to the transmission. Thanks for your help
  2. K

    Genie S-60 Boom Lift

    The tach signal comes from the alt. on these units. Check and might sure the belt is tighten on it. I have replace a few of them.
  3. K

    Genie TZ-50 Basket only moves in one direction

    If you swapped the coils around and it worked, you need to check the voltage at the coils. On those Genie units (TZ-50), I've had them loose the ground either in the ground control box or at the coil for that function. Just something to check. In the GC box, the top five or so terminals are...
  4. K

    Sell: JLG Ground Control Modules for booms

    I have a few for sell. 2 are UGM boards. P/N:10001110084K / 1001103667I / 1600411 - Platform Control Module P/N: 1600377 All boards are good. Came out of working units. Will fit units from 600 - up to 1350AJP but you need to double check before buying. Will ship in the US. $600.00...
  5. K

    Takeuchi tl 140 injection pump

    What is wrong with the pump? Could be the electric slide if it's not cranking.
  6. K

    JLG 460sj lift

    Sounds like there is a problem with the valve or coil on that unit. Have had them to do the same before and found the same problem when the hyd fluid heats up.
  7. K

    JLG 400S Caught Fire - Need Wiring Help

    You can go to JLG website and Genie's site and get all the diagrams off them.
  8. K

    John Deere 319D Problem

    The the monitor it says " Remote Starter conneted" and it won't unlock the parking brake. Found the pigtail under the cab for the connector and all the wires are sealed with a cap on the plug. Is there anyway to get it for the monitor so the unit will unlock? I have check everything on this unit.
  9. K

    Takeuchi TL150 Stalling

    Are any lights coming on? Takeuchi has electric fuel pumps mounted on the door. Check and see if it is working. Check the fuel lines at the door. See if the line has a bent in it causing it not to get alot of fuel though it. Check the filter in the water/sep. If no lights are coming on it...
  10. K

    diagnostic tech question - dpa 5 adaptor

    I got the DPA 5 thru pocketfleet.com It works really good and all the different types of equipment that we work on. I never used the software that came from Dearborn because you can spend the extra and get alot info with the pocketfleet.
  11. K

    Used Tracks Forsale $600 for pair

    Tracks came off of a TL130 skid steer and still have a good bit of life on them. Located in AL. Can email pictures of tracks. The size of them are 320x86x52. That size fits abunch of different machines like bobcats.
  12. K

    Air Brake Adjustment Questions On Trailers

    Wondering what is the best way to do them? I do them like looking at a clock. The Q4515 I do at 20 mins. The little ones on the 17.5 rims of lowboys I do at 45 mins backoffs. Was just wanting to know what everyone else do.
  13. K

    What year is this unit?

    just making sure. Thanks for the info. Where are located at?
  14. K

    What year is this unit?

    S/N: 2ZN01200 953C Cat loader Thanks for any info on this.
  15. K

    953c codes

    Thanks for the info. Can the micro switch for the neutral cause the loader to kick in & out of gear? Got a 070f03 - 299f13 still coming up. Going Monday to get a new sensor.
See more
Top