• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Keith Powell

  1. K

    Komatsu PC50MR-2 Motor stalling.

    Pump is $5,000
  2. K

    Komatsu PC50MR-2 Motor stalling.

    I have a pc50mr2 doing the same thing, I don’t want to spend $5,000 for a new pump, but it’s so bad now I can’t use machine, I have a farm and I absolutely depend on machine, I wish we could find a fix
  3. K

    Komatsu pc50 control panel - can they be repaired?

    Thanks bunk climber will do
  4. K

    Komatsu pc50 control panel - can they be repaired?

    Gw, I took a rotary file and cut a slot in the black part of the plastic panel holding gauge panel where it will slide over armrest support. Now I can just take the two Allen head screws out of the armrest and slide the panel over the armrest support. Then you have to unscrew top nut on switch...
  5. K

    Komatsu pc50 control panel - can they be repaired?

    10-4 will do
  6. K

    Komatsu pc50 control panel - can they be repaired?

    John C, I have removed gauge panel cleaned contacts and applied non conductive grease to the plug, same thing no change. My knowledge of electronics is very limited, but I hate to give up when panel will work on occasion.
  7. K

    Komatsu pc50 control panel - can they be repaired?

    Just some information, on my machine I can switch machine on and unplug/plug in master fuse located at battery compartment (red fuse) and panel will come on. Sometimes it will stay on after I crank machine, sometimes not. If it doesn't stay on after cranking I repeat procedure until it stays on...
  8. K

    Komatsu pc50 control panel - can they be repaired?

    Thanks delmer
  9. K

    pc50 gauges

    Mine quit too!!! I can unplug/replug red fuse at battery with key switched on and panel will light up. Sometimes it will continue to work properly and sometimes I have to go through routine several times. We need a fix.
  10. K

    Komatsu pc50 control panel - can they be repaired?

    Mine quit too!!!! We need answers. New monitor panel over 1k
See more
Top