• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Justwaiting

  1. J

    Oops!

    Well, the pump shop said I didn't harm anything so I am good there, thank goodnes. I did take the injectors in with it and two of them popped at low press and the other is sticking and they had to order parts for it. Hoping to have it back by monday. I am so ready for this thing to be finished...
  2. J

    Oops!

    I did finely get ahold of an injection pump shop yesterday. The guy says he doubts I did anything to it, but I am still taking it back to the shop that rebuilt it. The shaft isn't keyed so I am hopeing that happend is that it moved the gear on the shaft some. I was told by another friend that it...
  3. J

    Oops!

    Well I screwed up. I just hope not too bad. I hope one of you fellas can tell me how bad. I just replaced the injection pump on a LS185B and it all went well till I realized I forgot to unlock the pump. It is trying to start but even after unlocking it, it wont quite make it. So how bad did...
  4. J

    Newholland LS185b injection pump?

    Merry Christmas to you guys! Thanks pumpguys for responding. Yes willie's advice is sound and lines up with my experience (limited experience) in the past. I haven't had a chance to do much else to it sense then but hope to get back on it tomorrow. I have read other posts about this pump and...
  5. J

    Newholland LS185b injection pump?

    Thanks for the help willie. It sounds like it will help if I come to that. You are much better at finding stuff than I am. I searched the net but I couldn't find anything like those two pics that you posted.
  6. J

    Newholland LS185b injection pump?

    I agree, thanks for the help. I think I will investigate further before I go to the pump. The machine has 1600 hrs on it and he said he had the injectors changed at 400 hrs. But if I do end up at the pump, can you tell me how to set the timming before I pull it.
  7. J

    Newholland LS185b injection pump?

    not yet. I cant seem to find one. I pulled the pick up tube from the tank and traced it to the line all the way back to the lift pump. The only filter I find is the one before the injection pump. I agree it sounds like it is starved or lost its prime
  8. J

    Newholland LS185b injection pump?

    Thanks for the response willie. I have to run to town. I will be back in about an hour and hope to get started on that pump if you think that might be the problem. The guy told me it just started loosing power then sputtered a couple of times then died and hasn't started sense.
  9. J

    Newholland LS185b injection pump?

    I am not well versed in injection pumps but I know its best to have the number 1 cyl TDC on compression before you remove them. I don't have the specs on timming this engine though.
  10. J

    Newholland LS185b injection pump?

    yes, that looks like it.
  11. J

    Newholland LS185b injection pump?

    No willie, its a 3 cyl. and the tag says CNH U.K. limited. The inj. pump is made in Germany but I can't see a manufacture name on it.
  12. J

    Newholland LS185b injection pump?

    Hello. I am working on this unit with a no start problem. The filter has been changed as well as the lift pump and the lines have been bled. Still nothing. While bleeding the lines I noticed that the center injector line had a lot more flow than the front and back lines. I am leaning toward the...
  13. J

    why won't my 753 Bobcat start???

    Sounds like when you changed the fuel pump, air was introduced into the system. Take the filter or filters off and make sure they are full. Then loosen the injector lines at the injectors and bleed the system by either by useing the manual primer pump if it has one or cranking the engine till...
  14. J

    Hydraulic Cylinder disassembly

    You have a very valid point Willie. I suppose my use of the chain and boomers lacked detail. I usually have the barrel secured to my teardown bench with the rod suspended by a hoist so as not to fall and damage any components. Then I tighten the boomer a link at a time till the rod is in a bind...
  15. J

    New Kid On The Block

    Howdy folks, I just ran accross HEF and it looks like an interesting and helpfull place. I need help from time to time, so I will do my best to offer any help I can as well. I have apx 17 yrs of heavy equipment maintance but 32 yrs of hydraulic experience of all kinds. Thanks for the time and...
See more
Top