• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Johnson43

  1. J

    JCB 525-60 Telehandler

    We have a JCB 525-60 that will not go over 5 MPH, it was an intermittent problem, but now it is consistent. No active codes, we have checked relays and fuses and all is good there. It seems to me that it is stuck in turtle mode, as when you cycle the speed switch, the Rabbit does not appear on...
  2. J

    644H Payloader

    Thank you, that was very helpful. I ended up finding a shorted out wire by the rear taillights. My power probe short finder came in handy, as all the wires are bunched together in a loom.
  3. J

    644H Payloader

    I retract that statement,F23 is bad, was looking at wrong fuse. It blows as soon as you put new fuse in.
  4. J

    644H Payloader

    F23 is good.
  5. J

    644H Payloader

    Machine serial number is DW644HX574478, and for whatever reason the buttons on the dash arent working, and it wont let me get into the codes.
  6. J

    John Deere 644H Shifting Issues

    Jordan, was it the speed sensor that fixed your issue? having similar issues. Thanks
  7. J

    644H Payloader

    We have a John Deere 644H payloader that we are having issues with. The loader will not shift out of second gear, Trans oil is good, New trans filter, we also swapped out what we believe is the trans speed sensor. Also note we have no speedo reading also. There are three screw in type sensors on...
  8. J

    John Deere 644G won’t start

    644G payloader that is used on a farm to load turkey manure, farm hand said the loader quit moving while he was loading, shut machine off, tried to restart and starter would not spin over. They jumped the starter and it started right up, but would still not move. I have no power up to the FNR...
See more
Top