• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by joelmartin

  1. joelmartin

    Somebody pulled wires off at starter switch S510

    I realized that I could purchase a manual for very low cost. Found the info and the machine is up and running well.
  2. joelmartin

    Somebody pulled wires off at starter switch S510

    If someone has a manual or a wiring diagram or a photo how to attach wires to 4 position switch PIN: A3NJ11106 Model Year 2013 S510
  3. joelmartin

    2014 Hino 258 ALP with Allison transmission issue.

    Answered my own question.
  4. joelmartin

    2014 Hino 258 ALP with Allison transmission issue.

  5. joelmartin

    2014 Hino 258 ALP with Allison transmission issue.

    What conditions need to be met to engage forward gears? It decided to default to neutral, reverse still works fine. No codes of any kind, no debris in oil pan. Been reading a lot of info online and checking some things, where would you start?
  6. joelmartin

    Komatsu PC10-7 Swing function

    I simply removed the swing motor, as it's very simple to unbolt, even tho it makes no sense because the aux boom swing function was able to make it turn, and the splines on the swing/Slew motor are broken. It's being repaired to see if anything internally is worth saving or if we need to...
  7. joelmartin

    Komatsu PC10-7 Swing function

    None of those items apply in this case. Thank you for your time.
  8. joelmartin

    Komatsu PC10-7 Swing function

    Left hand joystick is swing and stick functions, the aux foot pedal to the right side swings the boom only. Next pic is main valve body. Last shows swing motor and 2 hoses connect to the dedicated valve for swing and blade only. Very simple design.
  9. joelmartin

    Komatsu PC10-7 Swing function

    PC10-7 S/N 26009 If the machine isn't level, it will self rotate to the low side It's gotten worse, now the swing spool valve doesn't rotate the platform at all. There's a simple valve body powered by its own 1/3 section of the stacked pumps. One function is the blade, works great even at...
  10. joelmartin

    Help please

    Was it hit by lightning or did someone weld on the machine?
  11. joelmartin

    Mobil Delvac 1300 oil ok to use in my 345BL

    It’s used by a Freightliner dealership I worked at and those engines have tight tolerances and are rather unforgiving plus trucks get driven hard I love that oil yes I’d use it for both hydraulic and engine
  12. joelmartin

    Kubota mini excavator track

    KX41-2V Kubota lost one track. Anybody know of a source for a used or affordable used one from a dismantler? Located in SoCal
  13. joelmartin

    Gehl CTL 60 track steer runs 10 seconds then shuts off

    Snipped wire near armrest controller (OH NO!) and ran new sheathed wire all the way to oil pressure switch. Life is good once again. Warning light comes on before starting and shuts off as expected in short order.
  14. joelmartin

    DBA is AZ Towing Solutions....an F550 Rollback/flatbed. www.aztowingsolutions.com...

    DBA is AZ Towing Solutions....an F550 Rollback/flatbed. www.aztowingsolutions.com Limited to light pickup trucks or cars, currently
  15. joelmartin

    Since 2018 I have been running my own business AZ Technical, LLC.

    Since 2018 I have been running my own business AZ Technical, LLC.
See more
Top