• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by joec2127

  1. J

    Bobcat T250 lift and tilt issue

    I wouldn’t think the aux would affect the lift and tilt though would it?
  2. J

    Bobcat T250 lift and tilt issue

    No codes are coming up. I wonder if it could be a hose collapsing? When I pulled the cylinders out to repack I did notice there was fluid behind the plungers so I had to crack lines to get them to come out.
  3. J

    Bobcat T250 lift and tilt issue

    I am having issues with my lift and tilt on my t250 foot control. The machine will lift, but when you try to tilt at the same time it stops. It doesn’t feel like a lockout valve. It definitely feels like it’s more in the tilt. I just repacked both tilt cylinders. I also just had the tandem drive...
  4. J

    Bobcat t250 low charge pressure

    Ok so I finally got my machine to a mechanic and he is saying the whole hydraulic system will need gone through rather than replacing just the part with the problem due to contamination of metal that has probably damaged other components. Is there not something on these machines that prevent...
  5. J

    Bobcat t250 low charge pressure

    That seems to be the issue. I changed the hydraulic filter and strained it and there were no shavings. I’m just trying to narrow this down before I tear into it.
  6. J

    Bobcat t250 low charge pressure

    I would think if it was a bad drive motor I would see loss of fluid somewhere but I’m not. It has been running fine and then all of the sudden started doing this after I replaced the lift tilt valve and sylenoid.
  7. J

    Bobcat t250 low charge pressure

    I have a 2005 Bobcat t250 2800 hrs foot control. I am getting a low charge pressure code followed by shut down. This happens after the fluid is up to operating temperature. When the code is thrown it feels like the brakes are engaging on both sides. Then the machine will shut down. I have...
See more
Top