• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by jimg984

  1. J

    no crank on cat backhoe 416 c

    check all postives and grounds connections good luck, could run a set of jumper cables
  2. J

    Steering cyl repack, won’t come apart, Case 580e

    try removing both hoses, on each cylinder GL or loose hose nut, you need to get pressure off
  3. J

    Ford 555 hydraulic screen

    ebay and amazon , for cheaper replacement pumps, your shold be OK after clean up good luck
  4. J

    Case 580SK Stalls and then won't restart without a shot of ether

    thanks for letting us know, did the clearing of retutn line and fitting work? ha ha
  5. J

    Case 580SK Stalls and then won't restart without a shot of ether

    makes sure you have a free flow on return line and fittings,, its a line from the enjector pump back to fuel tank, there may be a check valve in the return fitting on inj. pump Good Luck
  6. J

    Case 580B CK Nomenclature

    site isn't a vending machine, wait for someone to view your post
  7. J

    1987 Jcb 3cx 1400b black cab tacho/hours meter not working?

    no, trace it out
  8. J

    1987 Jcb 3cx 1400b black cab tacho/hours meter not working?

    that year model probably a cable (worm) drive follow from hour meter to see where it connects if its inner cable, its can be fixed with a unversial cable from a auto supply
  9. J

    John Deere 310J Backhoe no electrical power past starter except to horn.

    thanks for sharing
  10. J

    Roosa DBGFCC 431 63AJ snag

    check to if return line putting back to tank, should have some fuel retining bac to tank
  11. J

    1971 580ck steering wheel just spins...

    we used a boom pole and lifted front end off ground a little GL
  12. J

    Case 680E no compression on cylinder 1

    I would replace engine,, and keep digging while waiting on replacement engine, indusrial egpt is expensive to own,, not a petal car, good luck
  13. J

    Pins and bushings on 310 L backhoe rear arm, cylinders to move side to side.

    can remove some of side to side, shim with large washer from EBAY
  14. J

    310G JD 2004 wont start (died while going in reverse)

    the fitting out when the hose connects.
  15. J

    310G JD 2004 wont start (died while going in reverse)

    try taking the fitting out when the hose connects. be careful there could a ball and spring, don't drop or lose GOOD LUCK
See more
Top