• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by JGS

  1. J

    Kubota R630

    Bump back to the top. Anybody have any experience with these loaders? Good/bad? like/dislikes?
  2. J

    Takeuchi TW80 Loader

    How do you like the R630? I have 2 Kubota excavators. They have been nothing but great machines.
  3. J

    Takeuchi TW80 Loader

    Anybody have any experience with a Takeuchi TW80 wheel loader? Looking for any feedback or reviews?
  4. J

    Snow Wolf Ultra Snowblower

    Dose anyone have any experience with Cat snow blower attachment. The inner impeller design is different from most all traditional designed snow blowers. Was interested how they perform and the durability?
  5. J

    Snow Wolf Ultra Snowblower

    I believe snow blower of discussion is at: http://snowwolfplows.com/products/ultra-snow-blower/ Craft If you visit Buhler's website. http://www.farm-king.com/Region-US/allied_by_farm_king/hydraulic_drive_snowblower/hdsb_features.php You'll find they are being built under the Allied...
  6. J

    Snow Wolf Ultra Snowblower

    Craft Are you still running your Buhler snow blower? It looks like they may have been bought out. Their new blowers look much more like an Erskine blower. Any thoughts on their new changes?
  7. J

    John Deere 310 G

    I had a 410G with the same problem. It turned out the tranny oil was low as well. Start there first.
  8. J

    Kubota SVL Skid Steer

    I have been running a CTL 9 for about years now with a snow blower. The first CTL was a Takeuchi 130. Then replaced it with a Deere 323D high flow. I found with the stock tracks, pushing or plowing was difficult. As long as you were pushing straight on flat or down hill it was possible to be...
  9. J

    McLaren tracks failing 300 hours

    It may have been my post from another site. Here is a cut and paste of my experience with McLaren. The tracks now have approx. 550hrs. on them. I am now replacing them with Camoplast. "I know people on here have their own opinions and experiences with McLaren tracks. My experience I would now...
  10. J

    Deere 410G Loader Dump Cylinder Repair

    Thanks for the info! Yes I did have the seal kit. Once I installed the ring, I couldn't believe how easy it slid out. Not sure if I'm a fan to this method for retaining. I like the traditional threaded method better. Thanks again!
  11. J

    Deere 410G Loader Dump Cylinder Repair

    I have a leaking loader dump cylinder on a 2005 Deere 410G. I'm having difficulties disassembling the cylinder. I have the repair manual. For some reason the actual disassembly of the rod from the barrel is not included. The rod guide is not your typical threaded into the barrel. The problem...
  12. J

    Estimate training

    Has anyone used any of the classes at the Construction Estimating Institute? I have recieved mailings with class descriptions. They offer a wide range of estimating classes. I have no expereince with them. http://www.estimating.org/
  13. J

    Blowing snow with 95XT and 7424 Blower

    As Craft stated earlier, wiring the blower harness should not be a problem. I just converted mine over to a 14 pin connector. Was not to difficult. Talk to Buhler regarding your gpm's. That 95XT has some good flow not waste.
  14. J

    Blowing snow with 95XT and 7424 Blower

    CRAFT, Thanks for the input. I knew you would jump in with your past experiences. You have some good inside working knowledge with these blowers. I heard Buhler is making changes to their blowers for this year. Have you heard what changes or modifications might be?
  15. J

    Blowing snow with 95XT and 7424 Blower

    Kobe130 I assuming you were referring to 7424 series-3 when you wrote "stage 3". If so you might want verify your high flow gpm's of your 95XT and the blower. Did the dealer set you up with the blower? Sounds like the flow rate of your 95XT might exceed your blowers specs. I recently upgraded...
Top