• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Jerry capobianc

  1. J

    JD 310B can't split

    Thank for your reply. Yes I have blocked and shimmed the front axle,I have two 3x3angle irons on both ends of the frame members and also have the transmission blocked up I don't know if there is a place for jacking studs,I'll look closer when I go back out there. I just got a thread from...
  2. J

    JD 310B can't split

    Are there any tricks I should know about? All the bolts removed it won't split HELP
  3. J

    John Deere 410 - Hydraulic is dead

    Hi Arnstein I would like to get some info on your splitting of your JD?
  4. J

    Splitting JD 3108

    Thanks scrub puller I'll have to look for threaded holes thanks again
  5. J

    Splitting JD 3108

    Trying to split JD 310b backhoe loader. Removed all bolts but won't seem to break loose. I missing something?help
  6. J

    John Deere 410 - Hydraulic is dead

    Hello Arnstein I read about your problems and glad you found the problem and got it fixed. I have the same problem no HYD machine won't move the engine is fine,the questions I have is did you remove the front loader, or did you raise it and do the job with it raised? If you raised the bucket how...
  7. J

    1977 JohnDeere 310b lost hydraulics

    Where do I find the lost hyd thread
  8. J

    1977 JohnDeere 310b lost hydraulics

    The screen nothing but if the screen is not gummed up wich I hope it is I think that means the tractor has to be split that's where the safety supports come in
  9. J

    1977 JohnDeere 310b lost hydraulics

    Thanks much very helpful. Hopefully I won't have to do that when I clean the micro screen if it works?.. Thanks again
  10. J

    1977 JohnDeere 310b lost hydraulics

    Yes for safety
  11. J

    1977 JohnDeere 310b lost hydraulics

    1977 John Deere 310B Does anyone know how long I have to cut angle irons for the two lift cylinders on on the front loader of a JD.1977 310B. I looked in the manual could not find any measurement
  12. J

    1977 JohnDeere 310b lost hydraulics

    It was digging a hole just stopped no noise no nothing just stopped. It s my nephews machine he was operating it when it happened. He had a couple of guys look at it they put a new main pump on changed two filters. They had it running still HYD pressure no loader no backhoe no forward or reverse...
  13. J

    1977 JohnDeere 310b lost hydraulics

    Lost all HYD
  14. J

    John Deere 410 - Hydraulic is dead

    Thanks for your interest the machine is a 310B john deere 1977 I don't have the model or serial numbers yet I will write them down next time I'm there. Is there any way to put some HYD fluid in the pump before I try to start it? You mentioned starting my own thread I thought I did that ,how...
  15. J

    John Deere 410 - Hydraulic is dead

    Hi joe thanks for responding it took me a while to get this machine out of hole the backhoe was in a 5ft hole used two 3ton comealongs very slow process once I got the bucket out of the hole I was able to move to the side place it on top ground. From there I handsome big trees I could put chains...
See more
Top