• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Husaberg

  1. H

    JLG 45e Boom Lift Brake Not Releasing

    Thanks tex Not sure how I'll do that but makes sense!
  2. H

    JLG 45e Boom Lift Brake Not Releasing

    New to me machine One of the drive wheel brakes is not releasing It will drive in reverse but not forward Before tearing into things I'd like to know if anyone had this problem before and what was done to fix it Service manual is attached- See page 2-45
  3. H

    Tire keeps falling off

    Thanks hoss
  4. H

    Tire keeps falling off

    Typically 45 PSI You're probably right though, I must have slow leak
  5. H

    Tire keeps falling off

    I have a low hours cat skid steer with original tires. The right front tire just fell off for the second time. No puncture. Pressure was good. Any ideas why and how to prevent it from happening again?
  6. H

    Help! My Wacker RD12 has a mind of its own

    View of bottom of drive pump with new roll pin going in
  7. H

    Help! My Wacker RD12 has a mind of its own

    UPDATE #4 I got lucky! The problem was simple to fix The roll pin at the bottom of the swashplate shaft sheared off See 72 in diagram Hope this helps someone else down the road
  8. H

    Help! My Wacker RD12 has a mind of its own

    UPDATE #3 Well, looks like it's the drive pump I've got an experienced tractor mechanic doing the teardown now Hoping for an easy/quick fix
  9. H

    Help! My Wacker RD12 has a mind of its own

    UPDATE #2 Less than 100 PSI coming out of drive pump in both forward and reverse Flow from tank into pump seems good Is my pump fried? Anything else to check?
  10. H

    Help! My Wacker RD12 has a mind of its own

    UPDATE I’ve been operating the roller and trying to figure out why the controller does not control the speed or direction of the machine. In doing so, the roller slowly started losing drive. The steering and vibration still function perfectly but now the machine rarely moves in either forward...
  11. H

    Volvo SD70D roller question

    Most manuals have this info If you don't have a manual, pretty sure you can find one doing a web search
  12. H

    Help! My Wacker RD12 has a mind of its own

    My low-hours roller is uncontrollable Even if started in neutral it will take off full speed in forward or reverse It does not matter which way the controller is pointing and once moving the controller has no effect in either direction or speed The controller cable is intact The vibratory...
  13. H

    Hydraulic hammer advice

    Great idea! Thanks!
  14. H

    Hydraulic hammer advice

    I'm using a hydraulic hammer on my skid steer to break up concrete. Everything is great except pieces of concrete fly everywhere making cleanup a PITA. Any ideas on how to keep things contained? I propped up some 4x8 plywood panels which helps but a lot are required and constantly moving them is...
  15. H

    Wacker RD12 questions

    o_O
See more
Top