• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by high_lux

  1. H

    Help! V452t wheel loader - loss of hyd functions

    Hard to tell I guess and I’m not too sure? Could go and have the oil tested but probably show up dirt / silica etc now anyway. Majority of what you see in the dirty screens photo is more of like a pasty type sludge.
  2. H

    Help! V452t wheel loader - loss of hyd functions

    Yes drives fine. The VDP drives the hydrostatic drive so it is the front pump closet to the engine. The middle pump and / or circuit is playing up. The last pump/circuit appears to work fine too - (drives the continuous flow and inching pedal)
  3. H

    Help! V452t wheel loader - loss of hyd functions

  4. H

    Help! V452t wheel loader - loss of hyd functions

    Thank you The suction filters had a bit of debris on them including a few very fine metal particles which is probably of a concern, Also the oil was quite dirty particularly at bottom of the tank with the suction filters (there are left and right tanks - joined) it had almost a thin layer of...
  5. H

    Help! V452t wheel loader - loss of hyd functions

    Hi there, We have a giant v452t wheel loader. It has basically lost steering and hyd boom up / tilt functions etc - it tries and can move those cylinders slightly but has no power. Steering is difficult and slow, It won’t lift the boom even at full throttle - can use tilt slightly, can use 3rd...
  6. H

    Wheel excavator and 3 blade trim saw - enough flow??

    Hello All, I am looking at purchasing a 2nd hand Terex Schaeff HML32 wheeled excavator, I wish / intend to mount an Elkaer HS2300 triple blade limb saw on the end to cut / trim hedges and tree lines. I'm not an expert but from reading the specs of the excavator and also the required flow for...
See more
Top