• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by hd16b

  1. H

    Master Pin Modification

    Everyone I need to change the chains on one of my Allis HD16s and have everything lined up except new master pins which I can no longer get. What I have are the regular pins which are the exact same other than being a little smaller in the middle to make for easier removal. My question is how...
  2. H

    HD16B engine swap

    Yeah I would like to know about the 16b also,I still run 2 16s and am in NC also. 252 916 2927
  3. H

    Carco winch

    Merv, Have you ever seen a sliding gear carco on an AC machine with a powershift and modulating clutch? That is what I am planning to do to one of my 16s, I think it will work great because what you have is just a clutch between the engine and torque converter. My father hd11ep has the carco F7...
  4. H

    Allis Chalmers HD16 questions

    Pics of my 1968 HD16DP
  5. H

    Allis Chalmers HD16 questions

    Hey Merv. Here are the pics of the Komatsu segments on the hd16, they will work on the 16dp and the series B tractor. There were two Undercarriages for the 16, one up to sn 5901 and one after. The final gears are different from a round nose 16 to a series B, the early ones had a forward gear...
  6. H

    Allis Chalmers HD16DP

    yes you were Bobby, hey this is Doug
  7. H

    drott 40 fuel starved

    that 40 should have the 471, my 1979 40D did.First check the rubber fuel lines from the tank which are real close to the batteries and can easily get under a battery, don't ask how I know
  8. H

    Jd 690elc travel motor

    Thanks puffed, I replaced every filter on the machine
  9. H

    Jd 690elc travel motor

    Recently bought a 690elc and am having a problem with one of the travel motors leaking into the final drive blowing it's seal. I took the motor off to replace the shaft seal and fount the old seal turned sideways in the bore. I then cleaned everything up and installed a new seal which drove in...
  10. H

    Drott 40D tool cylinder Help

    Need a tool cylinder for a 40d drott,can't seem to find one. Case says the same cylinder is on a 35d,40d,40e and case 1080. PNs are S955895 or G105176. Please help if you can. Pn 2529162927
  11. H

    Fiat Allis 16B

    Give me a call I can give you some pointers.252 916 2927
  12. H

    Allsi chalmmers HD 11 EP Transmission locks up

    Give me a ring drag boat l will give you a hand. 2529162927
  13. H

    Redneck ruminations and thoughts

    Forgot to say on 50 gallons of fuel,471 Detroit. Also have some videosort under 22b digging sand and 16b working
  14. H

    Redneck ruminations and thoughts

    Yeah I can run two ten hour days on my 22b. I like to swing cast, reeling in and casting takes too long and doesn't quite go as far. Have a look on youtube under son working on farm.
  15. H

    wtb ring gear for carco model j10 winch.

    Money waiting. 252 916 2927
See more
Top