• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by HATCHEQUIP

  1. HATCHEQUIP

    Pictures from shop and field

    Found the air leak Dont believe its been drained or cleaned or checked or **** been done to it in years, about a 1/3 full
  2. HATCHEQUIP

    Pictures from shop and field

    4000 Manitowoc had to pull the main hoist linings out because the holes where the linings bolt together were cross threaded, stripped or both. Had machine shop oversize holes and drill plates. while it was out had new linings installed. Ya know theirs a special place in hell for the sadistic SOB...
  3. HATCHEQUIP

    Pictures from shop and field

    The finger "thingy" out at the end that actually grabs the can we took off and put on the new one
  4. HATCHEQUIP

    Pictures from shop and field

    Its the arm on the side of garbage trucks that grab the can and dump it.
  5. HATCHEQUIP

    Pictures from shop and field

    Does anyone recognize this device I wouldnt except for the fact that we pulled it off and installed a new one in its place and now customer wants us to rebuild it and swap it out for one of his other units
  6. HATCHEQUIP

    Pictures from shop and field

    She learned , now if I could just get the correct parts breakdown. they keep telling me that this is the clutch. . I have now sent pics of these parts maybe that will get it settled
  7. HATCHEQUIP

    Pictures from shop and field

    Got it back together and decided to tighten up the blade and linkages with some new pins and bearings and bushings
  8. HATCHEQUIP

    Pictures from shop and field

    Remember this.
  9. HATCHEQUIP

    Pictures from shop and field

    Coming back up
  10. HATCHEQUIP

    Pictures from shop and field

    Kubota V3600 in a sweeper getting a new head as this ones cracked.
  11. HATCHEQUIP

    Pictures from shop and field

    Thanks to ROAMER_AUS, Funwithfuel and Uffex on the 210 Volvo
  12. HATCHEQUIP

    Pictures from shop and field

    WWW.HATCHETTCRANES.COM HATCHEQUIP, Jul 28, 2022Report Reply ryanmuellerWell-Known Member Joined: Aug 6, 2017 Messages: 230 Location: oregon Looked a little harder and found them. This is looking from the top down. The one on the left is on the top and the one on the right is on the bottom...
  13. HATCHEQUIP

    Pictures from shop and field

    Thanks alot Ryan Ryan lady in your office gave me the # of someone in your shop but the connection was bad, the # was I have taken the controller box out of this 670 after i got a reman swing alternator on the machine and it is now putting out current but still no swing. I found some of the...
  14. HATCHEQUIP

    Pictures from shop and field

    This ones gotta learn to split for a slipping clutch .
  15. HATCHEQUIP

    Pictures from shop and field

    Rebuilt a few 118 108 98 78 Linkbelt fairleads
Top