• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Goose

  1. Goose

    john deere 318D skid steer service manual

    I fat fingered. Try goose19641983@gmail.com
  2. Goose

    john deere 318D skid steer service manual

    Could I get a copy of the 318D manuals goose19641833@gmail.com TIA
  3. Goose

    Case TR320 error code OPRPR

    That error code comes up when the instrument cluster does not detect the seat switch or lapbar being closed. It can be either of the switches but sound like it could be the lapbar since the dash wakes up when you set in the seat. It can also come up in the older software due to a glitch in the...
  4. Goose

    case 1840 loader problems after blowing a hose

    That is correct. Item 32 will have 33 34 and 35 on it which are the seals and just install plug # 4 and leave the return capped like you have it
  5. Goose

    case 1840 loader problems after blowing a hose

    You can remove the powerbeyound and get the plug to plug the valve and then remove the return line coming from the aux valve and cap it and that would take the aux valve all the way out of the system.
  6. Goose

    case 1840 loader problems after blowing a hose

    If the other hose looks fine just replace the damaged hose.
  7. Goose

    case 1840 loader problems after blowing a hose

    You cannot just cap off the line. You need to replace the line or remove the powerbeyound fitting that is in the valve and plug it off so the valve is like a machine without aux hydraulics.
  8. Goose

    70Xt Case fuel solenoid

    It will come out without pulling pump. Unbolt it and unhook the balljoint on the lever and drop it out the bottom. You may have to remove the oil line and tee fitting below the pump if it is installed in that area. The replacement solenoid should be a little bigger and it takes a mounting...
  9. Goose

    680 k case air problems

    Follow the larger air line from the compressor to the air tank. The check valve should be at the end of that hose. The check valve screws into a tee fitting that has a smaller line coming out of it.
  10. Goose

    Auto-level Tilt Disabling?

    Tags the self level can be disabled and enabled with no problems.
  11. Goose

    takeuchi TL250 4 in1 control circuit problem

    Does it stick in just one direction or both. First thing to check if it is just one direction is the switches on the left console. On e of the is for 1 or 2 way flow and it should be 2 way flow for a 4-1. The other is detent mode and it will lock the auxillary on in one direction until you hit...
  12. Goose

    Auto-level Tilt Disabling?

    I do have the instructions for bypassing the self level if you want them. About the only time I have done this is for guys that do alot of auger or breaker work. If you want them let me know.
  13. Goose

    Case 580 Super L Swing Cylinder Replacement - priority vs. non-priority swing

    The A2 is a direct replacement for the A1. The cylinders for priority swing and non are the same. The difference is all in the backhoe control valve, loader valve and the plumbing.
  14. Goose

    service manual for Case 1840 skid steer

    Are you sure someone didnt add some coolant that was in a container with some fuel left in it? The fuel and coolant systems dont really have a way to contaminate each other other than by human error. You might drain the coolant, flush, refill and check to see if it continues to get fuel in the...
  15. Goose

    service manual for Case 1840 skid steer

    Why do you thing you are getting diesel in you coolant?
See more
Top