• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by giannid

  1. G

    Stanley BR72 and BR67 Hand Held Breaker Charge

    PM sent
  2. G

    Takeuchi TL130 Fuel stop solenoid not getting Power

    Fuse box area was corroded and I just had to run a new wire with the inline fuse. Checkbthe schematic.
  3. G

    hydraulic shoring fluid

    Just got some hydraulic shoring on a workmans comp grant from the state. What are you guys using for fluid in your shores. I know you're supposed to use environmental friendly/biodegradable fluid. Wondering if anyone found a good alternative to the product you buy from the shoring...
  4. G

    Time for a new CTL- Takeuchi, Cat or something else?

    To me, the specs line up the closest on the tl6 to the tl130. Looks like the lift capacity and horsepower is the same. I need to make sure I don't loose any reach or dumping height. I don't want a cab machine so window option doesn't matter to me. Got a quote from Bobcat and it's the most...
  5. G

    Time for a new CTL- Takeuchi, Cat or something else?

    I have an aging Takeuchi CTL 130 and it's time for a new machine. I've been running the Takeuchi's CTL's for almost 20 years. I had a CTL machine before they were considered cool, LOL. Anyways, it's time for a new one and I'm going to be ready to purchase a new one in a month or so. Many...
  6. G

    Place to purchase weld on bucket ears and bucket pins?

    Problem with them is they don't sell direct and have to go through a dealer. The price that I got from a dealer was more than what I could buy a brand new 12 inch digging bucket from Aim attachments.
  7. G

    Place to purchase weld on bucket ears and bucket pins?

    I have a pavement bucket that I'd like to convert to fit a new machine. The top of the bucket is flat so it's a pretty easy ear to make. The new machine is a Komatsu pc 78 with a 50 mm or 1.97 pin diameter. I have the other dimensions for the ears as center to center and distance in between...
  8. G

    Discount Bobcat mini excavator parts?

    Anyone have a line on discount Bobcat parts/ I have to rebush and pin a Bobcat E20 mini excavator and trying to see if I can get parts at a discount. I found a place in the UK that has many of the pins and bushings aftermarket but they want me to pay by bank wire and won't take credit card...
  9. G

    Hydraulic issue with Kobelco SK 135 sr

    So I have a kobelco excavator that I've owned for almost 10 years. Recently, the machine started to develop a hesitation or jitter in two functions, the stick out and the boom up. It does it in both cat and john deere pattern at the same place so I don't believe it's in the pilot system. I...
  10. G

    Hitachi EX100-3 Overheating

    Check to make sure the muffler is not plugged up. This has caused an excavator to run hot for me in the past. They plug up with soot over time.
  11. G

    Takeuchi TL130 Fuel stop solenoid not getting Power

    Gary, I just wanted to tell you thank you for helping me out. As soon as I put power to the wire to the stop solenoid that has constant power, everything worked. What it end up being is the issue is the terminal on the back of the fuse box marked horn was corroded and when I pulled on it, it...
  12. G

    Takeuchi TL130 Fuel stop solenoid not getting Power

    Ok thank you. I'll let you know what I find. You Canadians aren't so bad. :)
  13. G

    Takeuchi TL130 Fuel stop solenoid not getting Power

    So k is the emergency relay that should have constant power at pin 1? Seems like some of the relays are combination relays as I don't see emergency stop 1 and 2.
  14. G

    Takeuchi TL130 Fuel stop solenoid not getting Power

    If I need to, Can I just run a new wire from the back of the fuse box at that 20 amp fuse to the to the actual stop solenoid and then the 5 pin to stop motor relay, and 1 pin at emergency relay? I'm pretty sure I know which one is the stop motor relay. not sure which one is the emergency...
  15. G

    Takeuchi TL130 Fuel stop solenoid not getting Power

    I am get switched power to the stop motor relay so I believe that side is ok.
See more
Top