• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by fred rosenberg

  1. fred rosenberg

    Chains for tying to the front bucket and pulling

    I got a bunch of lifting/rigger slings I bought at an auction. (Pretty heavy duty stuff) Most have the manufacturers weight/rating tag still attached. If you might be interested, send a PM
  2. fred rosenberg

    Well, I done did it...Amulet Hoeclamp on my NH 675E W/Extend-A-Hoe

    I put one on my CAT 436B about 10 years ago. I wish I hadn’t. It adds so much weight to the back of that machine (its already kinda got a high CG) that if there is any kinda grade, I gotta go up in reverse. The digging position of the pin setting is kind of a joke too, the clamp hits the ground...
  3. fred rosenberg

    Parking brake feels engaged

    Hey folks, this 310D feels like the service brakes is dragging, more so after warming up. Where do I start...changing the trans oil, reverser oil, and MFWD and final drive oils was my first plan
  4. fred rosenberg

    JD 310D Reverser Dump solenoid

    Found the problem...that circuit for the clutch disconnect relay goes thru the starter solenoid I guess. I’d kill for an electrical schematic. I really like this JD but CAT manuals are more detailed.
  5. fred rosenberg

    John Deere 410d reverser disengages as operating temp comes up.

    That solenoid is on the reverser, on top. The small single one. The FNR solenoid(s) are right next to it, , appears to be the same solenoid, just two stack on top of each other. Sorry your swapping the parking brake switch did not work out, it appears that troubleshooting pic you posted for me...
  6. fred rosenberg

    JD 310D Reverser Dump solenoid

    So Im pretty sure now my switch is good. Actually, I’m not sure of anything, other than my backhoe doesnt work. I have two references for a continuity check for the PB switch that directly contradict each other. The first one calls for continuity check between pins 6&2, the second one between...
  7. fred rosenberg

    JD 310D Reverser Dump solenoid

    Solenoids are good. No power to the clutch cutoff solenoid is my issue. That’s why when my parking brake switch did not pass the continuity test, I was happy as I figured I had solved the issue. I won’t know till I install the switch
  8. fred rosenberg

    JD 310D Reverser Dump solenoid

    I think... I don’t remember. No JD dealer in the southeast has that silly switch, I’m going to Chicago on Monday and have a dealer who is sending me one. If this doesn’t work I’m not sure what to do next.
  9. fred rosenberg

    JD 310D Reverser Dump solenoid

    Nope, no light
  10. fred rosenberg

    JD 310D Reverser Dump solenoid

    I don’t see a schematic being involved. This is a simple continuity check of a switch. If this diagram is wrong, I’ll be calling JD
  11. fred rosenberg

    JD 310D Reverser Dump solenoid

    Can you post your page?
  12. fred rosenberg

    JD 310D Reverser Dump solenoid

    Great. And I already ordered the switch. WTH...
  13. fred rosenberg

    JD 310D Reverser Dump solenoid

    Bueller? Anyone?
  14. fred rosenberg

    JD 310D Reverser Dump solenoid

    So looking at this troubleshooting picture, would you agree with the switch OFF there should be continuity between pins 6&2?
  15. fred rosenberg

    JD 310D Reverser Dump solenoid

    Are we looking at the same troubleshooting page? The one he posted clearly says 6&2 with the switch off, 6&8 with the switch on. I sure hope Im reading this right, I already ordered the switch.
See more
Top