• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by FloridaWayne

  1. F

    Level best automatic grade control john deere track loader questions

    I have no experience with the earthworks go app. I do have experience with ATI LevelBest box blade. I have spoken with tech support several times and had help from them adjusting settings etc. I highly suggest you call them directly. Good luck.
  2. F

    Wanting to buy a Skid steer. Any thoughts on the JCB tele skid?

    I ran a JCB skid loader once. I found it was not balanced because of all the weight on the one side. When trying to cut a grade, it kept rolling toward that side. Love the idea but could not handle this one major issue. Hope this helps. Wayne
  3. F

    National1 tracks

    I purchased 2 tracks for my Yanmar vio 27. I found the price very good I purchased tracks for my Yanmar Vio27. I dealt with Mason. He was in California and available later in evening so I could order after work. Shipped from Georgia if I remember correctly. I am in Florida so that worked...
  4. F

    Terex 35-2 excavators at auction. Looks like Terex sold mini ex division to Yanmar.

    Yanmar builds the Gehl excavators and Gehl builds the Yanmar track loaders with Yanmar engines.
  5. F

    Compact T30 or Bobcat Roller for Skid Loader

    I have a Compac T60, Bobcat 48" and 72" rollers. All smooth drum. The attachments are great as far as not needing a second machine moved in and out. The biggest issues I have are the hassle of back and forth between bucket and roller, and the fact that the Bobcat must drag the roller as it...
  6. F

    Pin-on Bucket Mounting Specs

    excavator bucket pin sizing chart StumpyWally I would like to reach out and also thank you for your work on this. It is great. Wayne
  7. F

    What does Accugrade option include on a cat 262c skid loader?

    It would be impossible as it would require activating two different controls. The Accugrade simply turns on and off the aux. circuit in one direction or the other. A dual setup would require activating a second set of control valves.
  8. F

    2003 Yanmar Vio27-2

    My vio27-2 needed the seals replaced in the center swivel because it was bleeding from one circuit to another. I had very similar symptoms. The blade would raise when I tracked forward. Reverse did much better. I would look at those seals. The new seal kit is different than the ones that...
  9. F

    ImpleMax Silt Fencer

    I recently purchased one of these and was hoping to get any information about operating it. I think the fence itself is proprietary but having no paperwork I am not sure. Any help or advice would be most appreciated.
  10. F

    Electrical issues Using a Bobcat 6 way dozer blade on a Takeuchi TL150

    Just realized that his Caterpillar is actually 14-pin. My mistake. The Cat I am trying to hook up to is (289c) 8-pin and I assumed it to be the same. As stated in the other thread Skid Steer Solutions has the hot ticket. Sorry for the confusion CRAFT, Wayne
  11. F

    Cat Skid Steer 289D ATTACHMENTS v BOBCAT - careful!

    best solution that I have seen I spoke with Rob (at Skid Steer Solutions) about this and he assures me that he can just bypass the controller on the blade. They sell several different 7-pin by pass kits. The one we need I think is $135. I will be ordering one soon myself. I can't explain...
  12. F

    Muffler broke off Bobcat T190

    That is just the tail pipe and should be no problem if welded back on correctly.
  13. F

    Cat Skid Steer 289D ATTACHMENTS v BOBCAT - careful!

    Just found the Bobcat part numbers I was told would convert Bobcat dozer blade 7 pin to Cat 8 pin. Bobcat attachments plus attachment control kit (7214742) $520 approx. Bobcat 14-pin T-harness (6725381) $100 approx. Bobcat electric adapter kit (7146468) $300 approx. This is all needed to...
  14. F

    Cat Skid Steer 289D ATTACHMENTS v BOBCAT - careful!

    Thanks Pafarmer, I look forward to the information Wayne
  15. F

    Cat Skid Steer 289D ATTACHMENTS v BOBCAT - careful!

    When I spoke with Grouser they did not have any conversion kit for the blade to 14 pin from 7 pin. Please let me know what the price was or part number if you have one as I would like to get and was told otherwise. I even discussed wiring directly to the coils and was told it would not work...
Top