• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by fast1buzz

  1. fast1buzz

    Older Cat Motorgrader SN

    Thanks for the support Welder Dave. I've been talking to a couple of these used parts outfits hopefully they can come up with something.
  2. fast1buzz

    Older Cat Motorgrader SN

    Thanks Cmark its a 14B part of the mystery solved now to find an engine. Looking for a complete engine anyone got one laying around?
  3. fast1buzz

    Older Cat Motorgrader SN

    Needing to find out if this motorgrader is an early 14. The serial number is 64C446. Anyone have a Cat reference book that shows this. Then once that is known I am in need of an engine. The one that's in it has a window by number1 cylinder that not supposed to be there. Any assistance would be...
  4. fast1buzz

    Eager Beaver deck replacement

    That worked out nicely rickw. Must say the oak should do just fine.
  5. fast1buzz

    Is there anything similar to this still being manufactured

    Your absolutely correct on your thinking 1930 about buying from rental company or auction its a good chance it wore out. The only thing I have ever been around that functions well in sand has tracks. The skid steers are a good bet. Almost all larger equipment manufacturers build them. A friend...
  6. fast1buzz

    Is there anything similar to this still being manufactured

    That is a Ditch Witch machine. It is still made although don't know how old the one is in the add. The fencing company I used to repair my fence after a 4x4 pickup slid thru it on ice [dumbass] owned one.
  7. fast1buzz

    a606 galion

    As I found out later on Galion blades have no operating hydraulic pressure until an implement control is activated. At that time the compensator valve reads the signal and tells the pump to make pressure. I have never in 50 years of wrenching on heavy iron came across a more complex system as...
  8. fast1buzz

    Empty weight? 97 Ford L8000 8.3L Cummins old county plow truck

    Here in Colorado you have to have a certified scale ticket for a title weight and they do tax you by the weight. I purchased a C70 Chevy service truck with a utility body and autocrane loaded that bad boy up with 10000lbs of tools compressor,welder,and whatever else I thought might be needed...
  9. fast1buzz

    Eager Beaver deck replacement

    I had some of the small pieces that were to short to use I tossed those and the old oak that came off the trailer behind the shop thinking I might use the stuff else where[probably not in this lifetime LOL] after 10yrs on the ground the oak has had it the Apitong looks like the day I put it there
  10. fast1buzz

    Trailer brakes not releasing

    Your right 63 caveman. I didn't even look at the original posting date.
  11. fast1buzz

    Trailer brakes not releasing

    While looking at the picture notice the upper roller is completely off the S cam. I can also see from the dirt scraped off the cam that there is very little to no movement of the cam. I would completely disassemble all of the brakes clean and reassemble replacing any worn or defective parts to...
  12. fast1buzz

    Cat 140M2 Snow Removal Tips

    Thanks for the info 20/80 will be helpful this winter. I have done many things over the years just never plowed snow.
  13. fast1buzz

    RGN vs folding gooseneck buying used trailer for track hoe

    Drawback is definitely the word for it. Once the pin/bore gets worn you will have massive movement between 5th wheel and plate more than the 1/4 inch allowed during inspection. I used this trailer daily to move pavers and curb and gutter machines. I had to devise a locking system for the pin so...
  14. fast1buzz

    Eager Beaver deck replacement

    Most trailer MFG's now are using Apitong wood on RGN's/Lowboy's. The wood is as tough as they come. My local lumber yard got some to redeck one of my trailers. Stuff even is not phased by sheepfoot rollers which will destroy an oak deck.
  15. fast1buzz

    Cat 140M2 Snow Removal Tips

    I had before retiring several years ago a Cat 14 acquired through a customer of my heavy haul business that went bankrupt. I have always used Cat equipment but now your Deere has a mighty fine machine and giving Cat some serious competition. As it is I purchased an old A606 Galion for a couple...
Top