• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by DslDrew27

  1. D

    Case 621b battery feed to ign switch

    Don’t know this machine real well, trying to diagnose random short in trans fuse circuit, while troubleshooting I accidentally shorted the battery wire in the ign switch. Don’t know where fuse or circuit breaker is. Any help is appreciated Serial number is JAK0028234
  2. D

    Case 440 skid steer Engine serial number/ Fuel Inj Pump help

    working on a Case 440 skid steer machine serial number is N6M426894 engine serial number is 46577728 assuming this is a Case number, not a Cummins ESN, which is why I'm struggling for info. looking for info regarding fuel injection pump replacement and exactly how to verify number 1 TDC. anyone...
  3. D

    Kawasaki 70ZV-2 A/C compressor?

    Serial number 70C5-5490 22,000 hours my dealer wants $1,612 for a new compressor. Just the clutch alone is 1000 bucks. parts numbers 33470-60130 $2458, 33470-70100 $1612 Any idea if its feasible to retrofit something cheaper, without turning into a huge project. i took a gander through my big...
  4. D

    Cat 262D Joystick Help

    yes i have schematic. if i have free version of SIS, would i be able to search for that document? Thanks
  5. D

    Cat 262D Joystick Help

    DTB01483 Right Hand Joystick thumb wheel/switch not operating, currently set up to open/close a grapple bucket all fuses good, have power and ground at 12 pin connector. remind me how the signal wire operates, and how to properly test it. i got the joystick harness in front of me now, 4 wires to...
  6. D

    Hydraulic Fittings (kinda)

    https://www.adaptall.com/ Might be worth a look, I’ve heard the guys at our local hyd hose shop use them.
  7. D

    C13 Cat/Peterbilt...low current on all 6 injectors

    Just a quick update..... put a new ecm on.....apparently C13 ECMs go bad all the time.....I had another truck in here simultaneously that wouldn’t stay running for more than 2 or 3 minutes.... got worse as it got hotter. Just sputter and die like it was out of fuel. Spent a day checking the fuel...
  8. D

    C15 Cat VVA actuator code

    Serial BXS37533 Flash code 94 FMI 5 and 7, low current and not responding (cylinder #5) Can someone hook me up with troubleshooting steps? Are they easy to replace? I’m hoping it doesn’t involve removing the whole housing to remove the solenoid. Much appreciated Drew
  9. D

    C13 Cat/Peterbilt...low current on all 6 injectors

    Thanks for the replies. I’ll let you know what I find out on Tuesday, hopefully I won’t get interrupted too much. Road calls seem to be picking up in frequency.... had one on Friday, air compressor discharge discharge line, thankfully it was 20 minutes from the shop. The 100 mile one way road...
  10. D

    C13 Cat/Peterbilt...low current on all 6 injectors

    C13 KCB prefix out of the 10 or so times i cleared codes and started fresh, i got the primary loss of speed signal twice, and all 6 injectors come up low current, every single time. codes only come on at high rpm, say 1800 to 1900 new set of fuel filters, new crank sensor, cam sensor coming on...
  11. D

    Cat 320E LRR fuel transfer pump?

    TFX01453 Just got off the phone with my dealer, Foley Cat in Bensalem, PA. I'm told that part number 357-6475 has been discontinued, superceded to 446-5409, nobody has one in the states, on back order from Dubai, 112 day lead time. gotta be a 357-6475 sittin on a shelf somewhere in the states. A...
  12. D

    Komatsu PC160LC-7 Counterweight removal?

    so my questions: Whats the size of eye bolt i need for lifting the counterweight? best i can tell its M44. I got my Komatsu dealer support person working on this for me. Looked in all the boks i got for this machine, but no part number or size tht i could find. Where can find a tap that big? ECM...
  13. D

    Komatsu PC160LC-7 Counterweight removal?

    Serial C10037 13,000 hours Some background info... Been going through this machine for a while, it's a mess. Both boom cyl's and Stick cyl got sent out, couple new hoses. Probably a solid 10 hours with a power washer, and its still disgusting. BTW, I work at a construction/demolition debris...
  14. D

    Komatsu PC160LC-7E0 swing motor o-rings

    serial number C10037 There is a block on top of the swing motor that’s leaking, pulled it apart and one of the o rings was fubar. The parts book doesn’t give part numbers. Only way to get the 3 O rings is by means of a service kit for 1100 bucks. None of the o rings in my komatsu kit seem to...
  15. D

    Cat 262c no crank no start

    i unplugged the alternator, and turned the key on, monitor said 0 RPM, gave the key a quick bump and she turned over. new aftermarket alternator for $185 versus a 249 reman from cat. She fired right up and voltage was at 14.2. totally forgot about that R terminal on the alternator, a while back...
See more
Top