• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by dmoore1979

  1. D

    case 1150c trans pressure problems

    I couldn’t take it since I’m waiting on parts I decided to pull winch off and back of trans Going to go ahead and freshen transmission up while I got it in the shop found a few future problems in there one clutch pack was wore down and 2 of the metal seal ring locks was worn out
  2. D

    case 1150c trans pressure problems

    i finally got it to my shop and got the valve off and apart the only thing i found was a broken range orifice spool spring would that cause any of my pressure problems ? still waiting on parts to come in from my case dealer
  3. D

    case 1150c trans pressure problems

    Sure will probably with some more questions lol thanks again
  4. D

    case 1150c trans pressure problems

    I’ve got all new gaskets seals and any springs that was still available coming in a few days for the valve body that’s what I was gonna try next Thanks
  5. D

    case 1150c trans pressure problems

    Yes the 200 psi is at full throttle. And it stays right there around 200 psi wen using breaks
  6. D

    case 1150c trans pressure problems

    I’ve been using it pretty much all winter dragging logs and about 2 weeks ago I took it back up on the hill and after the temp came up I noticed it was getting slow kicking in on the right side (forward gear) The more I used it the longer it took to kick in so then I put a new trans pump on...
  7. D

    case 1150c trans pressure problems

    As far as I know it’s all worked off trans pump The only other pump is the regular hydraulic pump It just started all at once
  8. D

    case 1150c trans pressure problems

    hello im new to this sight I have a 1150c dozer and having trans pressure problems I put a gage in the main line on the fitting on control valve wen its cold it runs around 300psi and everything works great after it warms up it goes down and stays around 200psi then the right track only...
See more
Top