• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by dirthog

  1. D

    Kobelco SK200 LC Mark IV

    The little accumulator is just in the system to take the pulse out of the pilot system is all don't think that will help.
  2. D

    988A wiring

    Thank you very much that gives me a place to start at least didn't want to open it up any more than necessary.
  3. D

    988A wiring

    Thanks on of the guys at work can get into the SIS or what ever from Cat i will look monday
  4. D

    988A wiring

    Understand that the problem is there is no big wire only two smaller ones about 10ga or so and they don't go right o the starter but up through the loom someplace.
  5. D

    988A wiring

    neighbor has a old 988A sn 87A9964 which surprisingly good shape and tight he got it from a coal company and the only person who ever ran it was the owner. Now for the bad part it has sit quite a while and having problem with the wiring it will not charge and the heater for the engine doesn't...
  6. D

    1998 Kawasaki 65Z 4 air leak

    That is also where the air dryer is it could be that leaking.
  7. D

    Kobelco SK200 LC

    OK had to do those a couple of times just make sure you mark everything well.
  8. D

    Kobelco SK200 LC

    2479U1970 is available from Kobelco it is in Japan the other 2479u1780 is in stock in the states at Texas.
  9. D

    Anybody belong to the HCEA?

    Been a member for years looking forward to this years show where they are going to start assembling the Terex Titan truck.
  10. D

    Dumb question of the day

    The side with the part number up like the one closest to the bottom of the picture!
  11. D

    Fiat allis 21b transmission removal

    The 21B we always took out from the top. Going out the bottom is a bear cause you have to actually stand it on it's nose to get it between the track frames.
  12. D

    Dart loader

    I will have to look and see if we still have anything around as we were a dealer years ago.
  13. D

    1997 Fiat Allis FL-145C questions

    Well I have spent the last 49 years working for a dealer start as a mechanic for 33 when it was still Allis Chalmers then Fiat-Allis who screwed thing up then the last 16 as a parts manager and now it's CNH who is worse yet than either of them.
  14. D

    1997 Fiat Allis FL-145C questions

    Parts will be a problem for that machine when CNH took over the Fiat end they more or less just dumped everything.
  15. D

    Operators Manual for a Mini-Excavator

    Of the 20 or so brands we handle NONE of them offers free manuals of any kind.
See more
Top