• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by dennis e suffriti

  1. dennis e suffriti

    left track slower than right cx36B

    John you were right it was the pump , this is what they found, valve plate had deep grooving between ports, cylinder block had one deep score all around , swash plate balls had severe pitting, pitting of scockets in swash plate, the gear pump was good Thank you for your time Dennis
  2. dennis e suffriti

    left track slower than right cx36B

    Finally got all the seals for swivel and finally got some time to finish rebuilding swivel and installed it today, guest what it wasn't the swivel. I pressure tested right on the travel spool valve ports and got 3300 -34000 dead headed PSI. Can't be the travel motor because when I swamped...
  3. dennis e suffriti

    cx36b

    looking for a quick coupler pin grabber for my cx36b, 40mm pins, 7 7/8'' center to center and 5.5'' between bosses
  4. dennis e suffriti

    left track slower than right cx36B

    Does any one know where I can get a quick coupler, pin grabber type new or used for my cx36b. Any body who sells them are out of stock and 6-8 week restock time
  5. dennis e suffriti

    left track slower than right cx36B

    Corey did you get the pilot valve
  6. dennis e suffriti

    left track slower than right cx36B

    I pulled the swivel about 1 1/2 weeks ago, the construction co. I work for has me going all over the state working long days , no time to work on case, plus it took about that time to get all seals and o-rings, got all parts today and of course I have to work this weekend, A case mechanic told...
  7. dennis e suffriti

    left track slower than right cx36B

    The more I think about it is not the swivel ,I proved by switching the travel motors lines, the problem switched sides . Step in any body PLEASE, John feedback please.
  8. dennis e suffriti

    left track slower than right cx36B

    OK John I pressure tested both p1 and p2 feed ports that feed left tracking and other's and right tracking and other's both relief valves pinned out at 3300psi there was a difference of 250-300 psi from left to right when I freewheeled the tracks in low and high speed . Could I be loosening...
  9. dennis e suffriti

    left track slower than right cx36B

    John, I am going to test the other pressure line that feeds the right side track and other things , in the process of finding a rebuilding kit for swivel , can I balance the pumps the relief valve.
  10. dennis e suffriti

    left track slower than right cx36B

    OK guy's I just crossed the main lines from main spool valve I switched the left foreword/ backwards lines to right side and right to left side, now the main spool valve in before the swivel , well the slow track crossed and it's on the other side now, well I know it isn't my final drive...
  11. dennis e suffriti

    left track slower than right cx36B

  12. dennis e suffriti

    left track slower than right cx36B

    John thank you, I pressure tested one of the main pressure lines going to the main spool valve, I dead headed with boom bottomed out the relief pressure was 3310psi, this case has one pump, 3 pressure lines two with a relief pressure of 3330psi [book says] the other has a relief pressure of...
  13. dennis e suffriti

    left track slower than right cx36B

    Can any one help me and point me where I can get my final drive motors running pressures , free wheeling Thanks
  14. dennis e suffriti

    left track slower than right cx36B

    Corey I forgot the number for southeastern is 740-432-6303 / 740-446-3910 / 740-374-7479 that is what rich e-mailed [Good luck ], let me know how you do
  15. dennis e suffriti

    left track slower than right cx36B

    Corey I bought it from parts@southeasternequip.com contact person Ted Persing 614-357-2017, It was a genuine case part, I did everything on line , didn't have to call , I was told by Rich Lobdell from wwwparts@townlineequipment.com that southeastern had three I bought one, The other case...
See more
Top