• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by davetile

  1. D

    1989 4x4 case 580 super e boom problems

    The tube is bulged out where the gland is jammed. I didn't realize it until I looked at the other one. It looks like I'm definitely going to have to replace that. How do I know if the chrome part is bent? To bulge out the tube like it did, I'm assuming the rod is bent.
  2. D

    1989 4x4 case 580 super e boom problems

    Took both cylinders apart. The gland fell off the chrome shaft on one cylinder. I can't get the gland out because it is cocked and jammed in the housing. Any tricks to getting this out? I'm thinking about cutting the cylinder housing and re welding it to get it out.
  3. D

    1989 4x4 case 580 super e charging issues

    What is causing the squealing sound? It sounds like the fan belt is slipping. It only does this when the alternator is connected.
  4. D

    1989 4x4 case 580 super e charging issues

    The alternator is squealing. I checked at the alternator with a voltmeter and it reads about 18 volts while running. When I pull off the wire closer to the engine block and run the engine, the alternator stops squealing. I think I need a new alternator. The one that is on the machine now is a...
  5. D

    1989 4x4 case 580 super e boom problems

    I've had it for 10 years. The boom worked fine a month ago. I'm the only one who works on it. Never touched those two cylinders.
  6. D

    1989 4x4 case 580 super e boom problems

    That was a good one! It is unlocked.
  7. D

    1989 4x4 case 580 super e boom problems

    Can one cylinder move the boom? Because when I operate the handle I can see one of them trying to move. Is it not moving the boom because oil is bypassing through the cylinder with the gland that's off? There is a line that connects both cylinders together.
  8. D

    1989 4x4 case 580 super e boom problems

    Is there a way to figure out which one is the problem? I doubt both cylinders dropped their gland nuts.
  9. D

    1989 4x4 case 580 super e boom problems

    The boom will not move. It has two cylinders. One seems like it's trying to move when I move the handle either way. All other cylinders and the rest of the machine work fine. What is the problem? Valve in the handles? Nut holding the gland inside one of the cylinders fall off? How do I test to...
  10. D

    case 580 super e need cylinder diagram

    Do I have to install it because I can seem to get it to fit anywhere.
  11. D

    case 580 super e need cylinder diagram

    I have I believe a 1989 case 580 super e. Boom model number is 35c. I am rebuilding the dipper cylinder. I need a diagram of how the seals and other parts go on it because when I took it apart, some of the seals and o rings were completely destroyed. The rebuild kit I got seems to have some...
  12. D

    Case 580 super E problems

    I didn't work on it yet. What if it is not in the loader valve? Where do I go next? I want to try to get all the info possible before I get greasy.
  13. D

    Case 580 super E problems

    I got the parts diagrams to finally work. AtcoEquip; I did try to get 25 out but it was so tight that I was afraid of rounding the allen head so I stopped trying. Any tips on gettin it out with out damaging it? Ill try again tommorrow to remove it. I got a picture of the stabilizer control...
  14. D

    Case 580 super E problems

    Thanks everyone for your help. That picture looks like the valve I was messing with today. Any more info or pictures would be greatly appreciated.
  15. D

    Case 580 super E problems

    Gary, I clicked on your link and it had an error message. I went on line with that address and it won't let me use it with out being a dealer.
See more
Top