1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Dave Neubert's Recent Activity

  1. Dave Neubert replied to the thread TL140 Tackahuchi.

    Yes the customer's workers left the inspection cover off the bottom and a T post went thru the tank. I figured I would have to pull the...

    Sep 24, 2020 at 2:28 AM
  2. Dave Neubert liked John C.'s post in the thread International TD20 DVT573 V8 "flutters as turbo comes on".

    I don't remember anything fancy in those engines but it has been many years since I've even looked at one let alone worked on them. I'm...

    Sep 23, 2020 at 10:42 PM
  3. Dave Neubert replied to the thread 580K Cummings Diesel Start problems.

    The starter drive can be replaced like others said check ring gear and check to see if drive is engaging enough you should be able to...

    Sep 23, 2020 at 10:41 PM
  4. Dave Neubert posted a new thread.

    TL140 Tackahuchi

    Any one ever have to pull the fuel tank if so what is involved

    Forum: Other Earthmoving Equipment

    Sep 23, 2020 at 10:33 PM
  5. Dave Neubert replied to the thread Massey 300 stops moving.

    Good luck finding any parts for this

    Sep 23, 2020 at 5:46 PM
  6. Dave Neubert replied to the thread 955L Torque Cooler Leak.

    I have used a piece of heavy 4 inch angle iron layed on top of the cyl rod

    Sep 23, 2020 at 5:43 PM
  7. Dave Neubert replied to the thread 580K Cummings Diesel Start problems.

    Bad starter drive

    Sep 23, 2020 at 5:35 PM
  8. Dave Neubert replied to the thread CAT 320C INJECTOR PUMP.

    Have you checked the screen on the bottom of the supply pump it is in the banjo fitting

    Sep 23, 2020 at 5:31 PM
  9. Dave Neubert replied to the thread Cat 330cl hydro pump failure I need help.

    I had this happen on a 330 turns out there was contamination in the big supply line had to pull line off and clean it out. I wont make...

    Sep 23, 2020 at 5:24 PM
  10. Dave Neubert replied to the thread Komatsu D38E-1 Pops out of Reverse.

    I would think it has some type of detent have you checked the linkage to make sure it is going all the way in reverse

    Sep 23, 2020 at 5:19 PM
  11. Dave Neubert replied to the thread TD-15 not moving forward or backward.

    should be able to get a used flange is it from the torque or the trans. And like RD said do yo have oil in the trans not likely that...

    Sep 23, 2020 at 5:16 PM
  12. Dave Neubert replied to the thread International TD20 DVT573 V8 "flutters as turbo comes on".

    I had one with a bad cam but it had a miss all the time. need to pull heads to get to lifters

    Sep 23, 2020 at 5:06 PM
  13. Dave Neubert replied to the thread International TD20 DVT573 V8 "flutters as turbo comes on".

    You need to plumb in a gauge in to the fuel system and check it under a load 25-35 psi is about you need

    Sep 23, 2020 at 5:05 PM
  14. Dave Neubert replied to the thread JD310A Backhoe Fuel line leaking at Injector.

    Replace the injection line

    Sep 23, 2020 at 12:32 AM
  15. Dave Neubert replied to the thread Do I have a cracked block?? John Deere 310A.

    Also I always use liquid soap to lube the liner seals oil or grease can cause the o rings to swell

    Sep 23, 2020 at 12:26 AM