-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Recent content by darinray
-
Mitsubishi BD2G Questions
Not sure on other people's fixes... BUT I'd check to be sure your relief valve is not stuck open and after cleaning out put a pressure gauge on it to see if pressure is adequate... The only other thing would be the pump itself I'd suspect... Good luck... -
-
-
komatsu year model reference?
If it's a D31A-16 it will be a 1977... If it's a D31P-16 then it's a 1978... -
komatsu year model reference?
Welcome aboard Ryan... Your dozer is a 1984 model.. Enjoy... -
Section for komatsu d20,21 and similar grey market dozers
Oh for sure I'll be cheaper. :) LOL... Yes same as the bevel gear side flange they pull off same way and seals replaced from the inside cavity... Good luck and talk soon... -
Section for komatsu d20,21 and similar grey market dozers
Yeah you can just pull the inner flange out using the 2 bolt holes built into the center acting as a puller... Then just change the seal out that way... You don't need to remove the shaft... Keep me in mind for all your parts needs if you still need them... May not be the cheapest but I try to... -
Furukawa CD5
Do you have any measurements you could send me.. I've got what appears by the photos some in stock here but as you know a picture could be deceiving.. :) Best to use email.. -
Komatsu D21a-7 steering clutch
M10 8.8 structrual steel zinc plated bolt "googled" 30 ft/lbs... Other websites may say differently so I'd compare and use your best judgement. -
Komatsu D21a-7 steering clutch
Bravo Don, Wow you made this process look easy and fun. :) Glad you got the girl back up and running. Did you drill and tap grease fittings on the housings? One note that you may not ever need to know but people reading this may is.. On both the final drive and bevel gear flanges Komatsu put... -
UPRIGHT SB60 problem erratic controls
Hey Andy, Yeah it stinks when equipment gets glitches like these. After changing the main control board and using the optimizer I was able to get the controls to funtion properly.. The dang board was like $1,000. :( Sorry I can't be of any more help..- darinray
- Post #18
- Forum: Other Construction/Demolition Equipment
-
Section for komatsu d20,21 and similar grey market dozers
Shoot look no further... I've got both the 16" and 17.5" $70 delivered price in stock.. -
Cat skid steer stop solenoid
ZSA00629.. Thank you for the reply..- darinray
- Post #4
- Forum: Track Loaders (NOT CTL)
-
Cat skid steer stop solenoid
Dang it.. I didn't scroll down far enough and start this thread in skid steers.. :(- darinray
- Post #2
- Forum: Track Loaders (NOT CTL)
-
Cat skid steer stop solenoid
Hello everyone. I'm hoping for some help here with electric schematic for a Cat 287B please. Having trouble with fuel and relays. :(- darinray
- Thread
- Replies: 5
- Forum: Track Loaders (NOT CTL)