• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by cps

  1. C

    Pin-on Bucket Mounting Specs

    The Hitachi Ex35 data would be a common Hitachi fitment, I.E covers a few machines. What I would say is that, the ZX26 and ZX33 Hitachi are different, the 26 is 35mm pins, so i would double check both Deere models.
  2. C

    Pin-on Bucket Mounting Specs

    Hi Guys, Is there any updates on the pin dimensions
  3. C

    Pin-on Bucket Mounting Specs

    Pretty sure they are the same as the CX460 which is listed, but not certain on that
  4. C

    Hitachi EX60URG

    The Machine in the picture is a Hitachi EX60-5, UK spec with long stick, blade and wide steel pads. Also hammer piped. The Hitachi EX60 URG has no ECU, it is a very basic system. URG refers to the short swing radius.
  5. C

    Pin-on Bucket Mounting Specs

    Hi StumpWally Any updates? I have a few i could possibly send you if you wanted to ad them?
  6. C

    Excavator tree saw or shear

    Id recommend a shear as there much safer than a saw!, have a look at our range of shears and let me know what you think? Aiden
  7. C

    Zaxis 200 No hydraulic power after Rototilt install

    Hi BHILL, Did you fit the R6 yourself? we are the rototilt dealer for Ireland, what system do you have? ICS? It soualvends like a servo pressure problem making me think its something to do with the feeder/shunt valve. Aiden
  8. C

    some work pictures by BuMach

    Great Thread BuMach, Look forward to the many updates! How do you like your elsa boring machines? I do similar work (although not as big machinery) I have a Sir meccania boring machine. Good machine but it did give some bother. Have been thinking of updating soon! Aiden
  9. C

    Pin-on Bucket Mounting Specs

    Thanks For adding the PDF Stumpywally! Very help full thanks Aiden
  10. C

    volvo l90e

    Its most likely a transmission solenoid.
  11. C

    Miller 302 trailblazer airpack?

    Any one got any advise??
  12. C

    Miller 302 trailblazer airpack?

    Hi All We are looking to get a miller 302 trailblazer with airpak on it? any one used one or have one? or would we be better with the bobcat 250? we are looking for a diesel one? does anyone know of second hand ones available? Are there any miller dealers on here as we are having very...
  13. C

    Hitachi ZX160 Stall fault

    There is a little strainer filter in the banjo bolt on the fuel lift pump (inlet hose) remove that and clean it! fairly confident thats your problem! Aiden
  14. C

    Bronze bushings vs idler bearings.

    Save your self the hassle and bite the bullet get new idlers! its all be tried before with poor results!
  15. C

    What material for Cat 943 bucket pins?

    Most pins are EN24t steel (4340), but also case hardened! You can use it as it is with fair results, but if you want o.e.m quality it needs to be hardened! A local machine shop may have some case hardened 2" bar in stock and be albe to make a pin from this! This is what i do in some cases Aiden
See more
Top