• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by BrokenMB

  1. B

    Bobcat T190 hydraulics locked out

    New problem. Get in unit pull lap bar down and light turns on but when push green button to operate. Nothing happens. Is all sensors attached to this lockout or just certain ones ? There is no code being thrown. Just not sure where to start. Already have checked for chewn wires but...
  2. B

    Bobcat T190 hydraulics

    I came back here to let everyone know machine is fixed. Put a new sensor from bobcat on and it fixed the problems. Was 5 times more money then the amazon one but it works
  3. B

    Bobcat T190 hydraulics

    Got cooling fan running. Small chunk of rubber stuck in valve. Got it cleaned up and checked charge pressures again Idle 290. Wot 380 lbs. plugged sensor back in and shuts down on low charge pressure. ??? The new sensor I put in I just ordered on amazon (prob Chinese ? ). Maybe it’s...
  4. B

    Bobcat T190 hydraulics

    So I’m going to look into this today. Does cooling fan supposed to run all the time ? Seems to me it has to as hydraulic flow goes through motor. I can’t see how it could cut on and off being hydraulic
  5. B

    Bobcat T190 hydraulics

    Sorry hit post before ready. Installed 1 medium shim wot 370lbs. Idle 270
  6. B

    Bobcat T190 hydraulics

    Machine does have hydraulic cooling fan but it is not running ?? Problem maybe
  7. B

    Bobcat T190 hydraulics

    So. Ordered a new spring for charge pump. Spring is bigger then one I took out. So installed with no shims. 245 at idle once oil is warmed up. Wot 320 lbs. if I plug sensor in it will still shut down on low charge pressure. I also put a new belt on. It needs it anyways. What next ...
  8. B

    Bobcat T190 hydraulics

    So finally got a guage on machine. Idling 50 lbs of hydraulic pressure. Wide open 250 lbs pressure
  9. B

    Bobcat T190 hydraulics

    I checked belt today. It looks good and tight. Started and watched until it shut off. Looks ok. Pump was turning
  10. B

    Bobcat T190 hydraulics

    Ok. So got lcd display working. Have a 05-22 code ( charge pump ). I ordered a new solenoid to try hoping that’s all it was but no. Still the same. Was going to put a guage in but local hydraulic shop couldn’t make a fitting to screw in where solenoid goes. I’ll have to try a...
  11. B

    Bobcat T190 hydraulics

    No one has any idea ? Or are people seeing this. Maybe I posted it wrong somehow
  12. B

    Bobcat T190 hydraulics

    2005 model if it makes a difference
  13. B

    Bobcat T190 hydraulics

    So. Went to use skid steer to move snow after sitting for a couple weeks and shuts down on hydraulic pressure after 10 seconds. My lcd display is messed up so can’t read code. Thought maybe froze up as it had been cold. Started and couldn’t lift bucket and no tilt but I could drive it for 10...
See more
Top