• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Bls repair

  1. Bls repair

    Cutting/making a cove or notch in a pond as a boat slip and ramp?

    Dig what you need into the bank but leave a strip of dirt to hold the water back.do the prep work when done dig the strip of dirt out and let the the water in
  2. Bls repair

    What the heck is this tool?

    It’s a lever tool ,a b size . So if you don’t know what it is ,lever B
  3. Bls repair

    This will be an interesting thread moving forward......

    Look at the wear and tear your saving on the machines.
  4. Bls repair

    Heavy equipment Welding repair

    That’s what they had . They climb in and out the back to get materials ,the tailgate was so heavy They needed a machine to raise and lower the gate. :D
  5. Bls repair

    Heavy equipment Welding repair

    Done
  6. Bls repair

    Heavy equipment Welding repair

    Latch and locks
  7. Bls repair

    Heavy equipment Welding repair

    A few more
  8. Bls repair

    Heavy equipment Welding repair

    Building some barn doors for a small dump truck
  9. Bls repair

    Dresser Td8g won’t grade to save my life

    Keeping blade angled helped some ,just got to deal with.
  10. Bls repair

    Dresser Td8g won’t grade to save my life

    Ran into a similar problem with a 39 kamatsu ,the blade was so far out from the track so you could angle the blade without hitting the track .that the blade would jump up and down like running over boulders when just traveling.
  11. Bls repair

    JD 310SE Brake pedal

    Before taking anything apart I would spray all moving parts down with WD40 and work it around to see if it loosens up
  12. Bls repair

    Any advice on hammering out pins?

    I hate to rain on your parade but ALOT of the time removing these pins turns out to be a major project. You may not have time to do it in the time it takes the tire guy to do his thing. I would use one of these
  13. Bls repair

    JD 330 track tensioner is leaking grease out a small hole under grease Zerg that

    Sounds like pressure release is not tightened.
  14. Bls repair

    larger dozer visibility graphic example

    I always thought I worked extra hard that week when I got two checks :D
  15. Bls repair

    Record pace breaking thumb pins

    Picking up odd size rocks could cause the pressure to be uneven across the pin. You could try having a stronger pin made ,but this may cause something else to break .
See more
Top