• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by bibs

  1. bibs

    my 135 massey

    Good day boys i sold the 135 ,hate to see it go but i can get on with more important jobs like my 4500 ford backhoe loader when i was foolishly driveing through the bush over 4 inch diameter trees one got into the clutch pedel now its freeplay somethings broke in the throwout shaft in...
  2. bibs

    my 135 massey

    thanks for the valuble input ! its pinned down to fuel shooting out of the 2, 5/16 bolts on the side of the cav pump but none at the 3 lines at the back of the pump going to injectors.
  3. bibs

    my 135 massey

    my worst fears...a pile of work theres plenty of that around here but the pays not to good.Anyway do you think a deisel would even run with no generator/alternator and a half dead battery? (tater season is just around the corner) thanks bib
  4. bibs

    my 135 massey

    about a 1972 3 cyl perkins runs good and strong but when you really work it ,she slows up over 30 seconds and dies.Will not start till it cooled down,then the same thing over again.{no throttle responce} It sat now for 1 year and dont want to start She is squirting at the front injector. A...
  5. bibs

    175 massey ferguson

    hi guys,the second fuel filter has that big square o ring to seal it to the housing.it seemed a little to big it was crushed almost all the way around but about an inch of it. The remaining part was exposed and rotting out and cracked , after replacing it she seems to run good,for now anyway !!
  6. bibs

    175 massey ferguson

    i did what you said it fired up and ran great! shut it off,started it up drove over to the wood pile,loaded the bucket with wood.Started it up and backed up 15 feet and she quit like before,the 5/16 bolt pissed the fuel out about the same pressure as me on a good day.I noticed after the manual...
  7. bibs

    175 massey ferguson

    yes its working, its moving the shaft its on the pump no smoke or mist,driveing with little load. I will put the tank on it and try what you said and let you know.4 small hex screws holding the vale cover on where hand tight and enabled the motor to have a thick cake build up,so its nice to know...
  8. bibs

    175 massey ferguson

    my 175 just quit on me in the feild ,not like it starved for fuel but like you shut your car off. My buddie said the camshaft broke , but after seeing all rockers moving good ...not that. any ideas of what i can try?
  9. bibs

    cat 215 c

    you goter pontiac !,they dont build the new ones like the old .
  10. bibs

    cat 215 c

    yes where does the time go Njge
  11. bibs

    cat 215 c

    88clc 4hg1408
  12. bibs

    cat 215 c

    is the caterpillar 215clc considered ''old iron'' ?
  13. bibs

    rollers and chains

    my old cat 215clc is in need of some new rollers and a chain.My question is are there any interchange from say a D5 under carrage be the same mabe the newer 320 315 ? thanks in advance
  14. bibs

    Mice Issues

    i got a box of bounce dryer sheets and put them in my old cars and dont have issues with the mice.
  15. bibs

    86 926 cat

    has anyone experiaced a flashing oil pressure light olny to turn the key off and on after warmup and light goes out?
See more
Top