-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Recent content by bean
-
B
Cat 906M Aux Hydraulics
It's the same noise as when you first turn the key on however I think it is a bit longer when the key is first turned on.- bean
- Post #6
- Forum: Compact Wheel Loaders
-
B
Cat 906M Aux Hydraulics
I have a log grapple that I am using on my Cat 906M. It functions fine I am just wondering how I can turn up the pressure? I have noticed that my kioti ck2610 that I was using previously has substantially more clamping power then the 906M. Any ideas? I have also had "!" (with square around...- bean
- Thread
- Replies: 6
- Forum: Compact Wheel Loaders
-
B
Fiat Allis(Hitachi) FR220.2
Not sure this will help however here is the machine digging. The wheels will not spin or spin very little when digging the transmission almost powers out.- bean
- Post #5
- Forum: Wheel Loaders
-
B
Fiat Allis(Hitachi) FR220.2
It shift gears fine however it is very slow in each gear. I would say max travel speed in 4th gear is 15 km/hr. It has lots of hydraulic power when digging I don't suspect its the engine that is weak. I will check the transmission oil, I believe it is in operating range on the dip stick.- bean
- Post #3
- Forum: Wheel Loaders
-
B
Fiat Allis(Hitachi) FR220.2
I recently came into possession of a FiatAllis FR220.2 Wheel loader. Most everything seems to work and the machine moves and functions as you would expect however the travel speed is ungodly slow. What would a person look at in order to troubleshoot the slow speed? The service manual has some...- bean
- Thread
- Replies: 5
- Forum: Wheel Loaders
-
B
Asphalt Recycling
Can anyone recommend a crusher/tub grinder for recycling asphalt to 1.5" minus at a rate of 200 TPH +? -
B
After market track rails advice needed!
heavyquip sells lots of track parts and are generally cheaper then cat however are not the same quality of course. -
B
RX900 Drive belt numbers
Obviously I know how to buy the roadtec genuine parts. With a few measurements and a phone call or 2 i got them crossed anyway. -
B
RX900 Drive belt numbers
Anyone have the drive belt numbers for a RX900? Ours don't seem to have any, if not I will have to do the measuring guess :Pointhead -
B
Help with a Bomag BW211d-3
Sorry but thats all I know. I took a picture of my pump and sent it to my hydraulic repair depot and they came up with the A4V and parts. Only other number I have is Ident-NR 2052703 Sach-NR 05800928 FabrNR 6468381 which I am sure you have aswell. -
B
Help with a Bomag BW211d-3
The pump was a Rexroth A4V. I had to replace the Solenoid asy (coil/armature tube) It was about 80 bux and a week delivery. The entire control for the pump is about 1k. -
B
Welding on a Wirtgen drum
we just flip the battery switch and weld away never had any problems, however some people claim you can melt the seals in the planetary but i don't think this has ever happened.