• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by AndyWofle

  1. A

    L150E Transmission issues

    No I still have to try putting that switch into “service”. All I had tried was selecting 1st on the rotary shifter then selecting reverse. The loader moved in both 1st and 2nd reverse. Both 1st and 2nd forward caused “clutch slippage”. I have a picture diagram of the solenoids at the coil and...
  2. A

    L150E Transmission issues

    Had a volvo tech out as i was busy, he tells me he swapped the solenoids around to see if the problem followed one. They're considering it has something to do with the internal pressures, they want to come back with gauges and see if the spools are moving and allowing oil flow like they're...
  3. A

    L150E Transmission issues

    I changed the entire assembly as that’s what the dealership did for the reverse solenoid. Now with the possibility of mixing up the wires, I did forward and 2nd according to my diagram. Would it still move in reverse 2nd gear like it does now? I will try and double check the wires. Could it be a...
  4. A

    L150E Transmission issues

    2004 Volvo L150E, was being used without issue, throw a "trans shifting solenoid" code, we changed the one and it was back to normal operation. A few days later two more tested out of spec 20-23 ohms. Loader pulled up to the shop, we changed the two other solenoids, the loader backed up in both...
  5. A

    Terex TA40 driveline issue

    No coolant in the oil, the code sometimes comes and goes, but is always on at some point in the day. Im leaning towards the sensor being faulty. Once the sensor is removed do you think ill be able to see anything inside? Will also cut filters open this time but have drained oil off bottom of...
  6. A

    Terex TA40 driveline issue

    Ah yes you are correct, i miss wrote B8 when meaning BA. I changed the filters multiple times and oil is clean so it must be the sensor or wires. Do you know if there is a way of testing the sensor?
  7. A

    Terex TA40 driveline issue

    Hello, I have a 2003 TA40 that is getting code B8. Service manual says its the "differential pressure switch". Two options are listed, transmission filter or the sensor itself. The dealership doesnt know the location of the sensor or how to test it. Anyone know where it is or have had this code...
See more
Top